|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-01-2020, 08:36 PM | #1 |
Gone Wild
Join Date: Apr 2020
Location: 1000 Oaks, SOCAL
Posts: 424
|
DS front seat bottom support framing
I'm replacing the front seat cushions in our 17 year old DS.
The rear edge of the old seat bottom cushion is bowed, also the body panel it sits on. The front edge of the seat bottom has frame structure under the body, but the rear edge does not. It seems the support for the rear edge of the front seat cushion is only the internal plywood panel and the plastic body panel - no aluminum framing. Is this normal? Last edited by R&TBabich; 06-01-2020 at 09:21 PM.. Reason: Oops, sides do not have aluminum frame, but have vertical body panel for support. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-01-2020, 09:22 PM | #2 |
Gone Wild
Join Date: Sep 2010
Posts: 879
|
Re: DS front seat bottom support framing
I made a 2x2 frame around mine....stiffened it up pretty good.....
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Looking for club car precedent front seat bottom | Golf Carts and Parts | |||
Need new front seat bottom and back for '06 Precedent | Gas Club Car | |||
front bottom seat wood boards | Gas Club Car | |||
WTB yamaha G9 front seat bottom | Golf Carts and Parts | |||
Front Seat Support | Gas EZGO |