|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-10-2020, 11:23 AM | #1 |
Not Yet Wild
Join Date: May 2020
Location: Florida
Posts: 27
|
No reverse after upgrade
Hey guys
OK i finished my install of the C64 kit with every option, forward works but tires seem to spin slow, when i try reverse the solenoid clicks and buzzer works but no tire movement. I checked everything multiple times and i cant find what i'm missing, i'm stumped, has anyone ran into this before or have a idea? 91 Club Car converted to solid state drive heavy duty solenoid, reverse contactor, admiral A1 motor, New cables, F&R switch, SR48600 controller, new pedal |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-10-2020, 11:40 AM | #2 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: No reverse after upgrade
Does the reversing contactor also clicks?
If so, can you post a picture of the Reverse contactor showing where the cables are connected? |
06-10-2020, 12:02 PM | #3 |
Not Yet Wild
Join Date: May 2020
Location: Florida
Posts: 27
|
Re: No reverse after upgrade
Yes that also clicks
|
06-10-2020, 12:17 PM | #4 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: No reverse after upgrade
Make sure all nuts are tight, even the ones that don't have a cable.
|
06-10-2020, 12:21 PM | #5 |
Not Yet Wild
Join Date: May 2020
Location: Florida
Posts: 27
|
Re: No reverse after upgrade
Also the solenoid and contactor both click when i push the pedal, and let off the pedal like they are supposed too. also the stat light on the controller lights up in forward and reverse just no tire movement in reverse.
|
06-10-2020, 12:23 PM | #6 |
Not Yet Wild
Join Date: May 2020
Location: Florida
Posts: 27
|
Re: No reverse after upgrade
Everything is tight i checked twice
|
06-10-2020, 12:35 PM | #7 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: No reverse after upgrade
I guess it must be a flat washer under the lugs that I see, that is not ideal, it should be:
Cable Lug in direct contact with the copper surfaceCan You identify where the cables go? The top of the contactor where the flat copper bar joins the two studs goes to Controller B+/Solenoid The other two cables on the Top of the contactor go to Motor S1 and S2 The cable on the bottom of the contactor goes to Controller M- |
06-10-2020, 12:41 PM | #8 |
Not Yet Wild
Join Date: May 2020
Location: Florida
Posts: 27
|
Re: No reverse after upgrade
If I switch the two top cables near the front of the cart then reverse works but forward doesn’t
|
06-10-2020, 12:50 PM | #9 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: No reverse after upgrade
|
06-10-2020, 12:54 PM | #10 |
Not Yet Wild
Join Date: May 2020
Location: Florida
Posts: 27
|
Re: No reverse after upgrade
yes
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Forward/Reverse upgrade for PDS? | Electric EZGO | |||
Forward/Reverse switch upgrade | Gas EZGO | |||
Pause, sometimes nothing in reverse after upgrade | Electric EZGO | |||
No Reverse after wire upgrade | Electric EZGO | |||
48V Upgrade/Reverse Buzzer | Electric EZGO |