|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
10-05-2010, 11:21 PM | #1 |
Not Yet Wild
Join Date: Sep 2010
Posts: 61
|
ezgo-club conversion
I am nearing the completion of my first cart build. I promise to post pics later,as i am proud of what a little coonass innovation can do with a pile of parts. I have installed the lift, made my own flip seat,made the rear roof brackets, put a nice basket rack on the front, and other things that I had to "rig". My question, I have a clubcar rearend attached to a ge380 motor, with a logisystems 700 cont.. The wiring diagram given to me seems pretty simple, but is there supposed to be 2 cables coming off the B+ side of the cont. one to the solenoid and the other to A1 on motor. This is a ezgo cart but it has been taken down to the bare bones(wiring that is). Also I am waiting on a pb-6 to install there are 4 wires in the pedal box, 2 are the 0@5k, the other i was told could b run throught he key switch to make sure the contactor is not always engerized. If anyone can give alittle help, thx. don't want to burn anything up.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-07-2010, 05:55 AM | #2 |
Gone Wild
Join Date: May 2008
Posts: 772
|
Re: ezgo-club conversion
Where are the pics??? We like pics?? Wire it up like we talked about and you won't have any problems.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Looking for a used 4x4 conversion kit 4 ezgo | Golf Carts and Parts | |||
Club Car controller conversion | Extreme DC! | |||
ezgo hei conversion | Gas EZGO | |||
club car to ezgo conversion | Electric EZGO | |||
ezgo gas to club car conversion | Gas Club Car |