2Ga. wire on a 2007 precedent

[easydoesit]

Its almost a shame to get an upgraded controller and keep stock motor. If you are looking for more torque, I would keep stock controller and go with a plum quick motor insted. This way for around $225, you'll get an extra kick (torque) and higher top speeds. If you are going to use the cart at consistent low speeds this may be a better set up bc you won't get overheating issues that you would with a high speed controller at those low speeds.

Recommended wire sizes by Alltrax
Controller Min wire AWG Standard Duty Min Wire AWG Heavy Duty
300 Amp Stock OEM – 6 AWG 4 AWG
400 Amp 4 AWG 4 AWG
450 Amp 4 AWG 2 AWG
500 Amp 2 AWG 2 AWG
600 Amp 2 AWG 1/0 AWG
650 Amp 2 AWG 1/0 to 2/0 AWG

[rabbitreborn]

Originally Posted by rowdy350

Since I can't afford all at once I guess the correct order would be.... 1-motor 2-wires 3-controller&FR switch ???? Sound about right to everyone!

1.Wires
2.Motor
3.Controller

That's the order I would proceed in. 2 gauge is more than big enough (and not always needed)

btw, on a precedent model, the F&R is controller based, so when you upgrade the controller, you are upgrading the F&R already.

[rowdy350]

Easydoesit-- thank you for the break down. It's people like you that take the time to post great information. Makes it so much more fun to upgrade and look like I know what I'm doing... Thanks for the help

[rowdy350]

Rabbitreborn-- thank you also for the help. I will pull the motor and order a PQ. I will update in a few weeks when I get it. Thanks for the help.

[easydoesit]

that's what we are here for. Good luck with that! Oh, by the way, with that PQ motor you'll do atleast 24 -26mph. Scubabud hit 28mph with PQ alone.

[rowdy350]

24-26???? I'm gonna need a disc conversion next!! Almost took out a Rhino the other day...he didn't realize I was that close and stopped way faster than I could.

[easydoesit]

Yeah, thats next on my list. You mentioned Rhino? You either work in a zoo or live in Tanzania! lol, Good luck with that.