|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
10-31-2010, 09:51 PM | #1 |
Not Yet Wild
Join Date: Oct 2010
Location: Northport, AL
Posts: 16
|
'04 Precedent Spindle Bushings
I'm having trouble locating a part number for the bronze spindle bushings that the king pin goes through. Are they only sold as a complete spindle assembly?!? The part number for the assemblies are 102287901 (LH) & 102878101 (RH). I just noticed a little slop in the bushings and I'd like to replace them. I am a machinist so I could just make them myself if I had the specs. Anybody got any bushings laying around that you could measure for me? I can disassemble and remove the bushings to measure but I'd rather just have new bushings in hand to get cart back going asap.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-01-2010, 02:31 PM | #2 |
Gone Wild
Join Date: Jan 2009
Location: south carolina
Posts: 160
|
Re: '04 Precedent Spindle Bushings
Don't know if they are same as ds model, but they aren't expensive, paid 2.50 for two from cc dealer. Hope this helps.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Precedent Spindle or A-Arm Lift? | Lifted Golf Carts | |||
Bushings | Electric EZGO | |||
G1 pins and bushings | Gas Yamaha | |||
Suspension bushings on 91 CC | Electric Club Car | |||
where to buy Bushings and spindle tube 94 up ? | Gas EZGO |