Series Controllers

offshoreracr · 11-14-2013, 05:31 PM

I needed a series controller and picked one up from Mike777. My cart is a 95 and the controller has 4 big terinals. The controller I got from him is out of an 07 and only has 3 big terinals. Is there a way to make it work or do I need to find an older controller?

Thanks in advance.

branson · 11-14-2013, 06:55 PM

The fourth terminal is for the plug brake I can trembler hoy to hook it up without it now. Check wiring diagrams for upgraded controllers like alltrax it will show the schematic with or with out it

scottyb · 11-14-2013, 07:53 PM

Simply by pass the A2 terminal. On the 4 blade control there are 2 cables connected to it. When A2 is not used (or present) splice or bolt (or replace) the cables together to make one run which bypasses the controller.
No problem

offshoreracr · 11-14-2013, 08:04 PM

Thanks guys!!!

offshoreracr · 11-15-2013, 04:28 PM

OK looking at now and I only have one cable to A2 which goes to the C position on the F&R switch.

offshoreracr · 11-15-2013, 04:33 PM

Just found the note on the schematic that said to remove the wire from C on the F&R switch.

11-14-2013, 05:31 PM	#1
offshoreracr Not Yet Wild Join Date: Nov 2011 Posts: 61	Series Controllers I needed a series controller and picked one up from Mike777. My cart is a 95 and the controller has 4 big terinals. The controller I got from him is out of an 07 and only has 3 big terinals. Is there a way to make it work or do I need to find an older controller? Thanks in advance.
offshoreracr Not Yet Wild Join Date: Nov 2011 Posts: 61

11-14-2013, 06:55 PM	#2
branson Not here yet Join Date: Sep 2013 Location: jupiter florida Posts: 504	Re: Series Controllers The fourth terminal is for the plug brake I can trembler hoy to hook it up without it now. Check wiring diagrams for upgraded controllers like alltrax it will show the schematic with or with out it

11-14-2013, 07:53 PM	#3
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,408	Re: Series Controllers Simply by pass the A2 terminal. On the 4 blade control there are 2 cables connected to it. When A2 is not used (or present) splice or bolt (or replace) the cables together to make one run which bypasses the controller. No problem

11-14-2013, 08:04 PM	#4
offshoreracr Not Yet Wild Join Date: Nov 2011 Posts: 61	Re: Series Controllers Thanks guys!!!
offshoreracr Not Yet Wild Join Date: Nov 2011 Posts: 61

11-15-2013, 04:28 PM	#5
offshoreracr Not Yet Wild Join Date: Nov 2011 Posts: 61	Re: Series Controllers OK looking at now and I only have one cable to A2 which goes to the C position on the F&R switch.
offshoreracr Not Yet Wild Join Date: Nov 2011 Posts: 61

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

11-15-2013, 04:33 PM	#6
offshoreracr Not Yet Wild Join Date: Nov 2011 Posts: 61	Re: Series Controllers Just found the note on the schematic that said to remove the wire from C on the F&R switch.
offshoreracr Not Yet Wild Join Date: Nov 2011 Posts: 61

Similar Threads
Thread	Forum
used PDS and Series Controllers Ez-GO	Golf Carts and Parts
DS Series owners with Alltrax controllers...	Electric Club Car
Club Car Series Controller + EZGO Series Wound Motor	Electric Club Car
controllers - which is better?	Electric Club Car
6x6V series or 2x3x12V Series/parallel	Electric golf carts