|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-03-2014, 09:30 AM | #1 |
Gone Wild
Join Date: Jan 2013
Location: Sun Lakes, Arizona
Posts: 610
|
Fender Flares
I have a TXT and bought a set of fender flares. The front looks like it will be fine but the rear is weird.
The shape of the fender flare is not the shape of wheel well opening. Is this normal? The locations where you are supposed to drill holes through the plastic of the fender flares has at least a 1/4" gap from the flat mating part to the actual body. Is this normal? One would think that the mating surface of the flare would be flush with the body but I do not see this. Just want to make sure before I start drilling holes. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-03-2014, 09:42 AM | #2 |
Gone Wild
Join Date: Sep 2012
Location: Savannah, GA
Posts: 2,760
|
Re: Fender Flares
Maybe post a picture. You may have been sent the wrong flares, maybe for an rxv or cc ds?
I ordered a txt light kit several times through a site sponsor and once I got a ds light kit by mistake. |
01-03-2014, 09:53 AM | #3 |
Gone Wild
Join Date: Jan 2013
Location: Sun Lakes, Arizona
Posts: 610
|
Re: Fender Flares
I will post one up once I get home, just thought I would check with others that have flares. A direct side view of a TXT with flares would probably help at least let me know if it is for my cart.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
bad boy fender flares | Electric EZGO | |||
Fender flares | Lifted Golf Carts | |||
looking for fender flares | Golf Carts and Parts | |||
EZ-GO Fender Flares | Golf Carts and Parts | |||
fender flares | Design Center |