|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-11-2014, 09:31 AM | #1 |
Not Yet Wild
Join Date: Nov 2008
Location: Tampa
Posts: 28
|
NPX vs AXE controller?
In the process of upgrading my series cart from 36 to 48 volts. Looking at my options for a controller, and I would likely go with a Alltrax 400 amp controller Is there any real performance increase to be had from the AXE controller? I read in this forum that most people run their AXE at the factory default setting, so I assume their not taking advantage if the programing capabilities. I can save about $50 by purchasing the NPX and my budget for this project is limited. Cart is to be used on the golf course, no steep inclines or rugged terrain. Anybody tried both?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-11-2014, 09:42 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: NPX vs AXE controller?
NPX will work for stock cart on stock tires used for golf.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
a DC motor controller ( electronic speed controller) | Golf Carts and Parts | |||
Replacing a 48V controller with 36v controller | Electric EZGO | |||
Plum Quick Bandit + 500 AMP Controller OR Executioner w/ Stock Controller | Electric Club Car | |||
Trade 400 amp 36v Curtis controller for 500 amp or higher 48v controller | Golf Carts and Parts | |||
Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05 | Electric EZGO |