Starting to Modify My 96' Club car 48v and need HELP!

[87chevy]

Okay, so where do i start! I have a 1996 club car 48v series cart. It has all new batteries replaced less than a year ago. It has a 6in jakes lift kit and 22x11x10 wheels/tires. It is a four seater. I am looking to do some modifications while i am replacing the body and it is off. So, right now i have a stock Curtis controller Model # 1204-410 which has a 225 current. For my motor it is the stock Club Car part # 1017857-01 motor with 3.10 HP special service . Does anyone have any suggestions on what i can do to increase my speed and my torque. As of now the cart does 13-15MPH. So is there any way to replace just the motor or just the controller or what kind of setup should i do to get to where i want it. I am thinking around 20-24 MPH should be good. Please let me out! any help would be great!!

Originally Posted by 87chevy

Please let me out!

???
ok , you are out

you can get a controller upgrade with larger cables, HD solenoid and use your stock motor or upgraded motor

good reading
http://www.cartsunlimited.net/speed-...-packages.html

look at Scottyb's controller packages
http://www.cartsunlimited.net/series-controllers.html

cable sets

http://www.cartsunlimited.net/battery-cable-sets.html

[glassk]

Originally Posted by crash test dummy

???
ok , you are out



http://www.cartsunlimited.net/battery-cable-sets.html

Hope so,..

[87chevy]

Originally Posted by crash test dummy

???
ok , you are out

you can get a controller upgrade with larger cables, HD solenoid and use your stock motor or upgraded motor

good reading
http://www.cartsunlimited.net/speed-...-packages.html

look at Scottyb's controller packages
http://www.cartsunlimited.net/series-controllers.html

cable sets

http://www.cartsunlimited.net/battery-cable-sets.html

haha wow i must have missed that typo ! Anyway thank you for the quick response and i think i already have an upgraded wiring. So which kits or which setup do you feel that would make the cart meet my expectations?

Pkg #454
500 Amp FSIP(GE) Controller 36-48 volts with Adjustable output and throttle response
comes with HD solenoid

cables should be 4g or better

Originally Posted by 87chevy

i think i already have an upgraded wiring.

make sure you have the OBC cable upgraded

http://www.buggiesgonewild.com/elect...grade-obc.html

[87chevy]

Originally Posted by crash test dummy

Pkg #454
500 Amp FSIP(GE) Controller 36-48 volts with Adjustable output and throttle response
comes with HD solenoid

cables should be 4g or better



make sure you have the OBC cable upgraded

http://www.buggiesgonewild.com/elect...grade-obc.html

Perfect! And I can keep my stock motor? And be able to reach the speeds and torque I want? Also where's the best place to buy this kit?

Originally Posted by 87chevy

Perfect! And I can keep my stock motor? And be able to reach the speeds and torque I want? Also where's the best place to buy this kit?

yea thats the good thing it can handle stock or upgraded motor

you can get it from from scottyb at carts unlimited

link >>>> http://www.cartsunlimited.net/series-controllers.html

also you can e-mail him and tell him about your needs , he will help you decide whats best
http://www.cartsunlimited.net/contact-us-1.html

[87chevy]

Originally Posted by crash test dummy

yea thats the good thing it can handle stock or upgraded motor

you can get it from from scottyb at carts unlimited

link >>>> http://www.cartsunlimited.net/series-controllers.html

also you can e-mail him and tell him about your needs , he will help you decide whats best
http://www.cartsunlimited.net/contact-us-1.html

Awesome! I appriciate the help! I'll let you know if I run into any other tough desicions!