|
03-28-2017, 01:35 PM
|
#1 |
|
Gone Wild
Join Date: Oct 2008
Location: East Texas
Posts: 586
|
RXV Wiring
I am about to install a LED light bar and battery meter on a 2010 RXV. I see that there are a few extra unconnected wires in the dash and that here is a wiring channel from the front to the battery compartment. First question, anyone know what the extra wires are for? Second, is there enough room to fish cables through the wiring channel? Thanks!
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-28-2017, 01:40 PM
|
#2 |
|
Gone Wild
 Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,232
|
Re: RXV Wiring
Don't mess with those wires. You can remove the floor mat and run your wires thru that channel.
 |
|
|
|
03-28-2017, 01:44 PM
|
#3 |
|
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,232
|
Re: RXV Wiring
Also remove the cup holder that will help.
|
|
|
|
|
03-28-2017, 01:56 PM
|
#4 |
|
Gone Wild
Join Date: Oct 2008
Location: East Texas
Posts: 586
|
Re: RXV Wiring
Thanks guys!!
|
|
|
|
|
03-28-2017, 05:00 PM
|
#5 |
|
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: RXV Wiring
|
|
|
|
|
05-11-2017, 01:04 PM
|
#6 |
|
Not Yet Wild
Join Date: Apr 2017
Posts: 7
|
Re: RXV Wiring
So did you connect the light directly to the battery or what? I'm trying to connect a pair myself. TIA!
|
|
|
|
|
05-11-2017, 07:34 PM
|
#7 |
|
Gone Wild
Join Date: Oct 2008
Location: East Texas
Posts: 586
|
Re: RXV Wiring
I did install a separate switch to turn the reducer on and off.
|
|
|
|
|
05-11-2017, 08:52 PM
|
#8 |
|
Not Yet Wild
Join Date: Mar 2011
Location: S.C.
Posts: 41
|
Re: RXV Wiring
Have you considered using a Wireless Control On/Off type setup?? There are many versions.
Such as http://www.genssi.com/index.php/rm01...ol-on-off.html |
|
|
|
|
05-12-2017, 08:28 AM
|
#9 | |
|
Not Yet Wild
Join Date: Apr 2017
Posts: 7
|
Re: RXV Wiring
Quote:
I apologize upfront for my ignorance, but where is the reducer located on an RXV? Or is that something I'd need to buy to install? If I have to buy, where did you buy yours? TIA! Sent from my iPad using Tapatalk |
|
|
|
|
|
05-13-2017, 04:24 AM
|
#10 |
|
Not Yet Wild
Join Date: Mar 2011
Location: S.C.
Posts: 41
|
Re: RXV Wiring
If you're adding lights...a Reducer is the best way. Here is youtube tutorial.
https://www.youtube.com/watch?v=1P1JLWCbmQE |
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Controller wiring/DCS fnr switch wiring | Electric EZGO | |||
| new wiring CC w/obc | Electric Club Car | |||
| Wiring lights and a winch? Use a converter or hard wiring? | Electric EZGO | |||
| Wiring lights and a winch? Use a converter or hard wiring? | Electric EZGO | |||
| 91 gas ez go wiring | Gas EZGO | |||
Linear Mode
