Newbie installed Navitas DC to AC cnv kit on 14 cc precedent cart won't charge.

[iamtristan12]

Hello follow Cart crew.
I just got a cart a few weeks ago. Like most thing so get, I tend to want to upgrade them asap. Did a lift, off road tires on 12s, added the phantom body. So now I ordered and installed the Navitas DC to AC conversion kit. And added an HD solenoid. Got it all set up and running great. Went to plug it in to charge and nothing.
Checked all the wiring, all the fuses. Pulled the neg cable for 10 mins. Etc etc.
Do I need to get a new algorithm for the ERIC charger or is there another issue.
Thank in advance for all the help.

[Fairtax4me]

Check for voltage at the charge receptacle on the cart.
Is the RED wire for the charge receptacle connected to the pack main positive?
If the Black wire form the receptacle still connected to the controller B-?

[iamtristan12]

Yes. The wires are connected correctly to the b- and b+
The voltage at the charger receptacle is .52 - .54

[Fairtax4me]

Then you don't have them connected right, or there is a break in the wiring somewhere.
Re-check those connections.
You should have full pack voltage at the receptacle.

[iamtristan12]

I found a crimp/break in the wiring.
The receptacle wiring was under a battery and the driving and vibration wore through the insulation.

It is now fixed and working correctly. I rewired it, put loom around it then ran it through a safer location.

Thanks for the tips!