I took my 87 out lastnight, got it to 22mph!

mjrowley · 09-20-2009, 11:23 AM

After I JB welded the driven clutch boots on. Still may need a new driven clutch.

Had a guy work my carb over.

But I still have a wicked rattling noise from the rear end.

HUMMMMM!

Anyway we hit 22/23 on a flat surface street, used the GPS to clock the speed.

Cart still needs lots and lots of work.

scottyb · 09-20-2009, 11:55 AM

I hope the JB Weld doesn't let go or the rear end or whatever is wrong don't come apart at that speed. Someone could be seriously injured

mjrowley · 09-20-2009, 12:47 PM

Im not worried.

JB is the wonder putty. When I can save up 250 for the driven clutch ill replace it.

mjrowley · 09-21-2009, 10:38 PM

Ok well I did some more investigating. It seems like the gap between the "Movable Face Assembly (#3), the "bushing (#6)" and the "Cam and Hub Assembly (#

" is quite large, maybe a 1/8"? so when the Movable and Fixed face plates (#2)are at there closest or farthest points all is ok. when they are in the middle it rattles really bad.

I guess its just another part thats wore out. Another $260.00 or so,

.

Part of the fun right? HEHEHE!

09-20-2009, 11:23 AM	#1
mjrowley Gone Wild Join Date: Aug 2009 Posts: 179	I took my 87 out lastnight, got it to 22mph! After I JB welded the driven clutch boots on. Still may need a new driven clutch. Had a guy work my carb over. But I still have a wicked rattling noise from the rear end. HUMMMMM! Anyway we hit 22/23 on a flat surface street, used the GPS to clock the speed. Cart still needs lots and lots of work.
mjrowley Gone Wild Join Date: Aug 2009 Posts: 179

09-20-2009, 12:47 PM	#3
mjrowley Gone Wild Join Date: Aug 2009 Posts: 179	Re: I took my 87 out lastnight, got it to 22mph! Im not worried. JB is the wonder putty. When I can save up 250 for the driven clutch ill replace it.
mjrowley Gone Wild Join Date: Aug 2009 Posts: 179

09-21-2009, 10:38 PM	#4
mjrowley Gone Wild Join Date: Aug 2009 Posts: 179	Re: I took my 87 out lastnight, got it to 22mph! Ok well I did some more investigating. It seems like the gap between the "Movable Face Assembly (#3), the "bushing (#6)" and the "Cam and Hub Assembly (#" is quite large, maybe a 1/8"? so when the Movable and Fixed face plates (#2)are at there closest or farthest points all is ok. when they are in the middle it rattles really bad. I guess its just another part thats wore out. Another $260.00 or so, . Part of the fun right? HEHEHE!
mjrowley Gone Wild Join Date: Aug 2009 Posts: 179

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

09-20-2009, 11:55 AM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,408	Re: I took my 87 out lastnight, got it to 22mph! I hope the JB Weld doesn't let go or the rear end or whatever is wrong don't come apart at that speed. Someone could be seriously injured