|
07-12-2010, 08:53 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2010
Posts: 2
|
1998 ezgo workhorse
ey, i have a 1998 ezgo work horse st 350 11hp. it has no dump cylinder. what are my options to buy one where can i get one and what size or stroke and bore? also my workhorse wont go up a very steep hill, and i just did a tune up is that normal??? what are my options. thanks
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-12-2010, 08:57 PM
|
#2 |
|
Doin' the Wild Thang
Join Date: Mar 2010
Location: Greenville, AL
Posts: 1,063
|
Re: 1998 ezgo workhorse
http://www.buggiesgonewild.com/ezgo-...-dump-bed.html Try this link.. It's in the tech section. It's got it all right down to the wiring diagram... As far as your climbing problem you can check the tech section as well. There is info in there about shorter belts that will help it drastically.. Hope this helps.
|
|
|
|
|
07-13-2010, 04:43 PM
|
#3 |
|
Not Yet Wild
Join Date: Jul 2010
Posts: 2
|
Re: 1998 ezgo workhorse
thanks alot!
|
|
|
|
|
07-13-2010, 05:35 PM
|
#4 |
|
Gone Wild
Join Date: Apr 2009
Location: indiana
Posts: 274
|
Re: 1998 ezgo workhorse
try to adjust the valves to .006-.004, should improve the engine a little, check the status of the drive and the driven clutches ive never had a problem with stock belts and climbing, if you let them, they will climb a wall for you.
 |
|
|
|
 |
| Tags |
| clutch, dump cylinder |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 1998 gas Ezgo | Gas EZGO | |||
| 1998 Workhorse.. | Members Rides | |||
| ezgo 1998 txt | Electric EZGO | |||
| 1998 txt workhorse 1200g parts for sale | Golf Carts and Parts | |||
| 1998 workhorse parts needed | Gas EZGO | |||
Linear Mode
