|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-29-2012, 03:26 AM | #1 |
Not Yet Wild
Join Date: Jun 2012
Location: Snohomish, WA
Posts: 45
|
G16 spider gear replacement
Where's the best place to get new spider gears for a G16? Never seen one blow apart. It actually punched a small hole in the cover. How big a job is it to replace them and what could cause it to blow up? It had plenty of gear oil as it came leaking out the hole. Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-29-2012, 03:39 PM | #2 |
Gone Wild
Join Date: Sep 2010
Location: Erie, Pennsylvania
Posts: 989
|
Re: G16 spider gear replacement
I don't think those are going to be high volume parts, so prices will probably be nearly non-negotiable. I would suggest you start with our site sponsors, then E-bay, then web. Can't help with "how hard it is" as I've never done it, but you will probably have to pull axles then replace gears. Good luck - RAY
|
06-29-2012, 05:49 PM | #3 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G16 spider gear replacement
Snopro1, your good used "diff" went out today. Good luck on the rebuild
|
06-29-2012, 06:23 PM | #4 |
Gone Wild
Join Date: Sep 2010
Location: Erie, Pennsylvania
Posts: 989
|
Re: G16 spider gear replacement
Glad to see you found your parts . As you found out, this is the best place to get your parts. - RAY
|
07-03-2012, 10:42 AM | #5 |
Not Yet Wild
Join Date: Jun 2012
Location: Snohomish, WA
Posts: 45
|
Re: G16 spider gear replacement
U da man Smallblock!! Got it out and back in. Life is good. Two PIA's in removal 1) Getting axle out when you don't own a slide hammer/puller. Improvised with a couple of big washers behind hub to create space then cranked down the hub nut to move the axle the first 3/4 inch. Then used hub as a slide hammer. Worked like a charm. 2) The Maingear and differential won't come out unless you drop the rear suspension arm a bit. I cleaned the case out as best I could. I used a pickup magnet to get as deep into the case as possible and picked up metal filings and a tooth (that would have left a mark) of the broken differential. This has been a parts cart for about a year so time to put it back together and get it back on the course. Thanks for the help!
|
07-03-2012, 05:13 PM | #6 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G16 spider gear replacement
Fantastic news! I useually take the hub off, remove the circlip, spary some PB Blaster, let sit awhile, install the hub backwards and start hitting with a "Ford" tool I know you said you were putting it back into the "fleet", I know it can make you money, but.....maybe you need to start a "build" of your own. Might be a good addition to your hunting atv collection, dogs love to ride on car's
|
07-04-2012, 07:43 AM | #7 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G16 spider gear replacement
[QUOTE=smallblock450sl; install the hub backwards and start hitting with a "Ford" tool
IIIII love it!!!!!!!!! |
|
|
Similar Threads | ||||
Thread | Forum | |||
G-9 Tranny positraction pics spider gear weld | Big Block Talk! | |||
G16 Spider removal | Gas Yamaha | |||
taking off spider assy. and the the starter pully spins but not the spider assy? Help | Gas Yamaha | |||
spider removal help | Gas Yamaha |