Reprogram speed code 4

[CartTrader]

Finally got my regen II to IQ cart up and running. Had to buy another controller after blowing the other one by accident. Seller said controller had speed code 4 programmed into it and sent the code 4 sticker with the controller...a standard Curtis IQ controller....He did say that they sometimes revert back to the old code upon energizing.. Well I am assuming mine did as I only get 14.5 MPH which is speed code 3. Called the closest dealer to see about getting it reprogrammed. 20 miles away. Now most people on here say that dealers will reprogram for free...surprise...they want $65.00 to reprogram it. I wouldn't mind a small fee but I think $65.00 is out of hand. Am I wrong in feeling this way? AND this is where I have been buying most of my parts from.


CartTrader

[greg-g]

that's cheep remember they must buy the code from Club Car the code out of the other controller should not work. you could have the 1st controller rebuilt and it will retain the code 4.

[CartTrader]

Originally Posted by greg-g

that's cheep remember they must buy the code from Club Car the code out of the other controller should not work. you could have the 1st controller rebuilt and it will retain the code 4.

You didn't read enough!! I have the code!! It is for That controller!!


CartTrader

[pete959]

yea that is nuts for a 10 min job i would tell for all the biz u give them they should do for free

[sportcoupe]

Originally Posted by CartTrader

You didn't read enough!! I have the code!! It is for That controller!!


CartTrader

I think you got scammed. Controllers do not "sometimes revert back to the old code upon energizing". You were sold a controller with code 3. Unless you have the actual electronic code 4 the dealer used to load into their programmer you do not have the code.

BTW, $65 is cheap to program code 4. No where else are you going to gain 5 mph for $65 in a golf cart.

[CartTrader]

Originally Posted by sportcoupe

I think you got scammed. Controllers do not "sometimes revert back to the old code upon energizing". You were sold a controller with code 3. Unless you have the actual electronic code 4 the dealer used to load into their programmer you do not have the code.

BTW, $65 is cheap to program code 4. No where else are you going to gain 5 mph for $65 in a golf cart.

I have the actual electronic code that the dealer uses to load into their programmer to set the controller to speed code 4. It came with the controller an A254 B358 C756 sticker/decal. IF AND ONLY IF I were purchasing speed code 4 from the dealer would $65 be a good deal. They wanted $165 if they had to get the code from Club Car. AND YES controllers DO sometimes revert back to old code. Many on here have also had this problem!!

CartTrader

[sportcoupe]

My dealer charges $75 for code 4.

You don't need to use !!! either.

[CartTrader]

Originally Posted by sportcoupe

My dealer charges $75 for code 4.

You don't need to use !!! either.

???? not sure what you meant by that "You don't need to use!!! either" ....Its raining and my brain isn't up to par today.

[sportcoupe]

Every post you've been using exclamation marks indicating yelling. These !! marks.

[CartTrader]

Originally Posted by sportcoupe

Every post you've been using exclamation marks indicating yelling. These !! marks.

Just a habit!! There I did it again without thinking. When I want to yell I use capital letters.