|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-09-2014, 02:39 PM | #1 |
Not Yet Wild
Join Date: Jun 2014
Posts: 8
|
Txt 2010 getting to freedom
I have an ezgo txt 2010-2011 "10th month of 2010". It has a curtus controler with toe mode but there is not a place to plug in the freedom chip. My question is, can the controller be changed to freedom mode with a hand healed diagnostic tool?If so is their any special codes that I need from the manufatur? How do I go about getting this done?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-09-2014, 04:51 PM | #2 |
Not Yet Wild
Join Date: Jun 2014
Posts: 8
|
Re: Txt 2010 getting to freedom
I just got passed by two 13 year old girls bringing my kid home from the pool! This is a big problem for me. I don't need more than the freedom mode but I do need the extra 5 to 6 mph!
|
06-09-2014, 04:59 PM | #3 |
Not Yet Wild
Join Date: Dec 2008
Posts: 31
|
Re: Txt 2010 getting to freedom
Seems strange that you would have a tow switch but not ports in your controller. I didn't think they were still making DCS in 2010.
Mind sharing your serial number? |
06-09-2014, 05:12 PM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Txt 2010 getting to freedom
Where is F&R switch, and is it a moving handle or a rocker switch?
|
06-09-2014, 05:14 PM | #5 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Txt 2010 getting to freedom
Sounds like you have a 48V TXT. That has a TCT (TruCourse Technology) controller rather than a PDS (or DCS) controller.
You have to have a handheld programmer to change the mode it is in. I don't know if any special codes are needed to put it into freedom mode. |
06-09-2014, 08:03 PM | #6 | |
Gone Wild
Join Date: Jul 2010
Location: Peachtree City, Ga.
Posts: 2,759
|
Re: Txt 2010 getting to freedom
Quote:
FWIW I have driven the '13 version of this cart and it is stout. Nice cart. Also, I don't think anyone makes "series" carts anymore. Not sure when EZGO stopped but I'd be surprised if you could find a series cart past 2007 and I'm skeptical about that year. Too bad because series carts are tough and reliable. |
|
06-09-2014, 08:56 PM | #7 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Txt 2010 getting to freedom
OH, its 48v? Heres how unlock 48v txt freedom mode, or any RXV with curtis controller (for the millionth time). The handheld WILL NOT unlock freedom mode if it is locked out! MUST use this device. Look for the matching plug in the passenger side area under the seat.
|
06-11-2014, 04:35 PM | #8 |
Not Yet Wild
Join Date: Jun 2014
Posts: 8
|
Re: Txt 2010 getting to freedom
Cgteck- how do I get one of these for my 2010 48v ezgo. Yes under the seat on passenger side is a plug that looks like it would fit that unit.
|
06-11-2014, 08:08 PM | #9 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Txt 2010 getting to freedom
Ezgo part number 615518 is the part number for the single use passkey. Www.shopezgo.com doesnt seem to offer the single use key anymore :(... It appears that it can be had at www.m-and-d.com/ezgo-615518.html for $97.42
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Txt 2010 getting to freedom | Electric EZGO | |||
2010 EZGO PDS - Freedom Chip w/ 6" lift??? | Electric EZGO | |||
Build 2010 TXT Freedom (Stereo) | Electric EZGO | |||
Radio Install 2010 RXV Freedom | Electric EZGO | |||
2010 TXT 48 Volt Freedom Option | Electric EZGO |