Not hitting RPMS

mudmad · 04-02-2010, 08:31 PM

I have 1999 Club car ds on stock tires, i have bigger ones but want to figure out my RPM problem first. I have added a timing advance key, a 200 rpm spring and a power kit from Carts plus, disconected the gov and rev limiter, on the tach the max i can reach is 3700 rpm. The guy at carts plus said i should be hitting upwards of 5000 RPMS. I checked and adjusted my throtle linkage. On the drive clutch the belt rides ar max 3/4 inch from the top, the way the wear marks are on the clutch the belt has been riding there for a while and i just did the mods to it.

04-02-2010, 08:31 PM	#1
mudmad Not Yet Wild Join Date: Apr 2010 Location: Anchorage Ak Posts: 6	Not hitting RPMS I have 1999 Club car ds on stock tires, i have bigger ones but want to figure out my RPM problem first. I have added a timing advance key, a 200 rpm spring and a power kit from Carts plus, disconected the gov and rev limiter, on the tach the max i can reach is 3700 rpm. The guy at carts plus said i should be hitting upwards of 5000 RPMS. I checked and adjusted my throtle linkage. On the drive clutch the belt rides ar max 3/4 inch from the top, the way the wear marks are on the clutch the belt has been riding there for a while and i just did the mods to it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Forum
1981 G1 RPMs	Gas Yamaha
par car clicking when hitting gas	Gas Columbia ParCar
Hitting the rev limiter..... problems caused?	Gas Club Car
HP and RPMs	Extreme DC!
low rpms only	Gas EZGO