lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk!
Big Block Talk! Everything about swapping a big block engine into your cart!



Post New Thread  Reply
 
Thread Tools Display Modes
Old 08-03-2007, 11:13 AM   #1
pfcwest
Not Yet Wild
 
Join Date: Jul 2007
Posts: 8
Default Throttle Linkage...18hp briggs. NEED HELP

Ok, I have a Yamaha G9. Installed Briggs 18hp vanguard w/o govenor. Bought mounting bracket, wiring harness and clutch from CPP. (TOM ROCKS!!!...big fan here) Anyway, my motor has no govenor and doesn't have the remote throttle linkage as I'm sure you guys are aware of. I need to find a way or if someone has a bracket to hook up the throttle. On the stock carb there is no return spring for the throttle lever. I have the motor in, it fires, idles, rev's clutches work.....JUST MISSING a way to hook up throttle. Was thinking about putting string on it and driving it around like that just so I can drive it... lol jk. Thanks.

I posted links to a thread for the same motor I have but I don't know where Ron got the bracket, I'm assuming it came from CPP with the motor. any help would be appreciated.

http://www.buggiesgonewild.com/big-b...18-hp-b-s.html

Thanks.... almost there.

Last edited by pfcwest; 08-03-2007 at 11:19 AM..
pfcwest is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 08-03-2007, 12:58 PM   #2
TheNewGuy
Admin/Moderator
 
TheNewGuy's Avatar
Yamaha
 
Join Date: Dec 2006
Location: Ohio
Posts: 17,965
Default Re: Throttle Linkage...18hp briggs. NEED HELP

Yes, the bracket and return spring were included with the kit from CPP. I ran
the stock throttle cable right to the carb.

TheNewGuy is offline   Reply With Quote
Old 08-03-2007, 01:44 PM   #3
pfcwest
Not Yet Wild
 
Join Date: Jul 2007
Posts: 8
Default Re: Throttle Linkage...18hp briggs. NEED HELP

Sent you PM>

How did you hook up the stock yamaha throttle to the carb? Did you go through the cable that CPP supplied and attach to the end of it with the stock cable?

Pictures would be best if you have them.

I need to get a return spring which I spoke to Tom about and he stated that he hooks it to the nylon hole on the bottom of the carb / throttle lever and hooks that to a hole on the engine to pull the lever back.

My problem is on the stock yamaha cable it has that big metal clasp with the hole in it and that hole is too big to tap into the small throttle lever.
pfcwest is offline   Reply With Quote
Old 08-03-2007, 02:17 PM   #4
TheNewGuy
Admin/Moderator
 
TheNewGuy's Avatar
Yamaha
 
Join Date: Dec 2006
Location: Ohio
Posts: 17,965
Default Re: Throttle Linkage...18hp briggs. NEED HELP

You have a PM!!!

TheNewGuy is offline   Reply With Quote
Old 08-03-2007, 02:18 PM   #5
TheNewGuy
Admin/Moderator
 
TheNewGuy's Avatar
Yamaha
 
Join Date: Dec 2006
Location: Ohio
Posts: 17,965
Default Re: Throttle Linkage...18hp briggs. NEED HELP

I don't have any pics of that right now. I cut the clasp off the stock cable.
Used a piece of sold wire (paper clip) on the lever and joined that to the cable
with a cable coupling (small sleeve with a set screw). Works great!!!!

TheNewGuy is offline   Reply With Quote
Old 09-27-2010, 02:43 PM   #6
BigCountry79
Gone Wild
 
BigCountry79's Avatar
Yamaha
 
Join Date: Nov 2009
Location: Boondocks, MS
Posts: 693
Default Re: Throttle Linkage...18hp briggs. NEED HELP

id also like to know about the throttle linkage, mine is bone stock b&s 18hp with a governor, i guess you just rig a bracket up?
BigCountry79 is offline   Reply With Quote
Old 09-27-2010, 02:47 PM   #7
nitro1
Gone Wild
 
nitro1's Avatar
Yamaha
 
Join Date: May 2010
Location: OHIO
Posts: 1,517
Default Re: Throttle Linkage...18hp briggs. NEED HELP

i would like a pic with GOV and with out GOV how u guys hook these things up :)
nitro1 is offline   Reply With Quote
Old 09-27-2010, 07:31 PM   #8
TheNewGuy
Admin/Moderator
 
TheNewGuy's Avatar
Yamaha
 
Join Date: Dec 2006
Location: Ohio
Posts: 17,965
Default Re: Throttle Linkage...18hp briggs. NEED HELP

Blow this pic up and look close. The cable from the gas pedal to the carb, no gov.

100_1017.jpg

TheNewGuy is offline   Reply With Quote
Old 09-27-2010, 08:22 PM   #9
nitro1
Gone Wild
 
nitro1's Avatar
Yamaha
 
Join Date: May 2010
Location: OHIO
Posts: 1,517
Default Re: Throttle Linkage...18hp briggs. NEED HELP

is it a really bad thing to not have it hooked to the GOV ?

i just dont want a blown up motor lol
nitro1 is offline   Reply With Quote
Old 09-28-2010, 10:06 AM   #10
TheNewGuy
Admin/Moderator
 
TheNewGuy's Avatar
Yamaha
 
Join Date: Dec 2006
Location: Ohio
Posts: 17,965
Default Re: Throttle Linkage...18hp briggs. NEED HELP

Quote:
Originally Posted by nitro1 View Post
is it a really bad thing to not have it hooked to the GOV ?

i just dont want a blown up motor lol
Mine has been in service from day one with no gov...over 4 years no problem. You have to listen to the engine, your foot is the gov. Some people may be better off with the gov.

TheNewGuy is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk!


Thread Tools
Display Modes



All times are GMT -5. The time now is 06:50 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.