lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 02-14-2013, 01:10 PM   #1
MRFUSION
Not Yet Wild
Yamaha
 
Join Date: Apr 2010
Location: Peace River Alberta
Posts: 37
Default G22 Governor?

Hi there guys, I have a guy here who doesnt want the full governor mod but just speed it up a little, I have a feeling it will be back for the mod. Just cranking the 10mm locknut on the rod all the way until out of threads is about as good as it gets with having the governor still hooked up right? Hurting anything doing this? After doing this do I need to adjust the throttle cable from governor to the carb to remove play? Thanks Shad
MRFUSION is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 02-14-2013, 03:20 PM   #2
hello
Gone Wild
 
hello's Avatar
Yamaha
 
Join Date: Sep 2010
Location: ontario
Posts: 182
Default Re: G22 Governor?

Hi I have a Yamaha g16 I did the adjustment to the 10 mm nut and also ordered the speed spring from cart part plus and I changed the oil to 10 w 30 synthetic it should not hurt the motor just change oil.


hello is offline   Reply With Quote
Old 02-14-2013, 03:26 PM   #3
MRFUSION
Not Yet Wild
Yamaha
 
Join Date: Apr 2010
Location: Peace River Alberta
Posts: 37
Default Re: G22 Governor?

Cool, I was just making sure that tightening the nut all the way doesnt do more harm than good thats all. I did lots of slack in the cable to the carb after and took that out. Does that sound right? Shad
MRFUSION is offline   Reply With Quote
Old 02-14-2013, 04:36 PM   #4
hello
Gone Wild
 
hello's Avatar
Yamaha
 
Join Date: Sep 2010
Location: ontario
Posts: 182
Default Re: G22 Governor?

That sounds right I make sure the carb opens all the way if not adjust cable from Governor. I have a lift kit and 22s on it and I do 40 km
hello is offline   Reply With Quote
Old 02-14-2013, 07:30 PM   #5
smallblock450sl
Sometime's............
 
smallblock450sl's Avatar
Yamaha
 
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,854
Default Re: G22 Governor?

Leave alittle slack in cable #1 and #2. Don't want the throttle shaft moving before the ignition fires off or you'll have backfiring.
smallblock450sl is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Governor Gas EZGO
re-set the governor Gas EZGO
G1 governor help Gas Yamaha
88 ez go governor Gas EZGO
governor Gas Club Car


All times are GMT -5. The time now is 07:52 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.