Double Tube Rear Bumper

azTony · 10-23-2015, 04:57 PM

Does anyone have pictures of one of these installed? Just trying to figure out without any directions or hardware how these are installed. Does it go on over the plastic bumper or does the old bumper come off? If mounted over the existing then what type hardware is used to mount it with? I also see I need a license plate mount some how. Hmmm, any pics/ideas would be helpful

kernal · 10-23-2015, 05:54 PM

For a Jakes bumper: https://www.youtube.com/watch?v=P7GW7YmMCQM
Others are probably similar.

One example of a license plate bracket: http://www.everythingcarts.com/p-217...cket-only.aspx

Check other site sponsors also.

azTony · 10-23-2015, 06:40 PM

I have bigger problems, the holes don't line up and after measuring the bumper square pads with the mounting holes are not symmetrical. More work than I thought

DaveTM · 10-23-2015, 07:22 PM

I dunno what brand of rear bumper your trying to attach, but I mounted an Outback Fab on mine. It bolted on thru the bottom of the cart's existing holes where the rear step would bolt on. Here's a pic of it mounted if this helps:

10-23-2015, 04:57 PM	#1
azTony Gone Wild Join Date: Jan 2013 Location: Sun Lakes, Arizona Posts: 610	Double Tube Rear Bumper Does anyone have pictures of one of these installed? Just trying to figure out without any directions or hardware how these are installed. Does it go on over the plastic bumper or does the old bumper come off? If mounted over the existing then what type hardware is used to mount it with? I also see I need a license plate mount some how. Hmmm, any pics/ideas would be helpful

10-23-2015, 05:54 PM	#2
kernal Gone Wild Join Date: Jul 2010 Location: Peachtree City, Ga. Posts: 2,759	Re: Double Tube Rear Bumper For a Jakes bumper: https://www.youtube.com/watch?v=P7GW7YmMCQM Others are probably similar. One example of a license plate bracket: http://www.everythingcarts.com/p-217...cket-only.aspx Check other site sponsors also.

10-23-2015, 06:40 PM	#3
azTony Gone Wild Join Date: Jan 2013 Location: Sun Lakes, Arizona Posts: 610	Re: Double Tube Rear Bumper I have bigger problems, the holes don't line up and after measuring the bumper square pads with the mounting holes are not symmetrical. More work than I thought

10-23-2015, 07:22 PM	#4
DaveTM Gone Wild Join Date: Oct 2012 Location: Southwestern Pa. Posts: 6,215	Re: Double Tube Rear Bumper I dunno what brand of rear bumper your trying to attach, but I mounted an Outback Fab on mine. It bolted on thru the bottom of the cart's existing holes where the rear step would bolt on. Here's a pic of it mounted if this helps:

Similar Threads
Thread	Forum
Home made tube bumper	Electric Club Car
Can someone measure TXT rear axle tube diameter please?	Gas EZGO
Rear rack and rear tube bumper	Members Rides
K5 Blazer Rear Tube Bumper & Tire Carrier Build	Design Center
G9 Rear end vent tube	Gas Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum