lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 11-05-2016, 02:25 PM   #1
MikeF0209
Getting Wild
 
MikeF0209's Avatar
Club Car
 
Join Date: Oct 2016
Location: Charlotte NC
Posts: 106
Default LED Light on/off switch to Mictuning LED rocker switch

Hey fellas,

I'm installing my RecPro LED light kid in my 2013 EZO TXT and I've come off a Power Reducer (Madjax) to a fuse box and I'm checking with my multimeter and I'm getting 12V at the source of the fuse box and 12v at the exit to the accessory, in this case the LED RecPro kit. I have the DC Reducer switched so when the switch is on there is power and 12V when the switch is off no 12V out of the fuse box.

However, there is no power on the two pins of the harness for the on/off switch that came with the light kit? Would it possible that the switch is bad? I should be seeing 12V on those two connectors correct?

I have a MicTunning headlght LED switch but its got 5 pin connectors in the back and im not sure which of the two from the harness to put on which pin?

Do i have to wire this mictuning with its own source of 12v + and ground to from the fuse box for it work?
Attached Images
File Type: png front.PNG (113.0 KB, 0 views)
File Type: png back.PNG (111.4 KB, 0 views)
MikeF0209 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 11-05-2016, 02:27 PM   #2
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,449
Default Re: LED Light on/off switch to Mictuning LED rocker switch

I don't know which pins are which, but you will need 3 wires minimum. One B+ from fuse panel, one B- for the switch illumination, one to the load or device to be powered.
cgtech is offline   Reply With Quote
Old 11-05-2016, 03:14 PM   #3
MikeF0209
Getting Wild
 
MikeF0209's Avatar
Club Car
 
Join Date: Oct 2016
Location: Charlotte NC
Posts: 106
Default Re: LED Light on/off switch to Mictuning LED rocker switch

Quote:
Originally Posted by cgtech View Post
I don't know which pins are which, but you will need 3 wires minimum. One B+ from fuse panel, one B- for the switch illumination, one to the load or device to be powered.
Got it. I know which is which but of the two in my standard on off switch I just don't use one?
MikeF0209 is offline   Reply With Quote
Old 11-05-2016, 03:35 PM   #4
JohnnieB
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
Default Re: LED Light on/off switch to Mictuning LED rocker switch

These might help.
Attached Images
File Type: jpg HIUajQm.jpg (42.5 KB, 0 views)
File Type: jpg led-light-bar-rocker-switch-wiring-diagram_532379.jpg (47.1 KB, 0 views)
JohnnieB is offline   Reply With Quote
Old 11-05-2016, 08:13 PM   #5
MikeF0209
Getting Wild
 
MikeF0209's Avatar
Club Car
 
Join Date: Oct 2016
Location: Charlotte NC
Posts: 106
Default Re: LED Light on/off switch to Mictuning LED rocker switch

Quote:
Originally Posted by JohnnieB View Post
These might help.
Yea I've seen those. I have 4 of those switches and the box they go in, I need to read and research more on now to lop loop them together.
MikeF0209 is offline   Reply With Quote
Old 11-11-2019, 10:04 PM   #6
davjohn28
Gone Wild
 
davjohn28's Avatar
Yamaha
 
Join Date: Apr 2019
Location: Baton Rouge, LA
Posts: 204
Default Re: LED Light on/off switch to Mictuning LED rocker switch

ahhhh, im about to wire up head lights along with auxillary LED lights, does that mean i will more than likely have to splice in the " ON " pos and neg of the switch in order to power lights as well as plug in the load wire?
Attached Images
File Type: jpg switch panel.jpg (104.1 KB, 0 views)
davjohn28 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Replace light switch with 3-position key switch Electric EZGO
98 txt dcs want to convert for switch to dash rocker switch Electric EZGO
F/R Rocker switch Electric EZGO
Precedent Light Kit with Led Rocker Switch Electric Club Car
Key switch and F&R rocker switch help Electric EZGO


All times are GMT -5. The time now is 09:16 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.