|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
05-27-2017, 07:35 PM | #1 |
Not Yet Wild
Join Date: Apr 2017
Posts: 2
|
Need wiring help for Albright SW180 Solenoid
Hello there! I've recently upgraded my 1997 Club Car DS motor and controller to a 500 amp EMP motor and 500 amp GE controller. I was told I had to install a heavy duty solenoid, so I purchased an Albright SW180 solenoid. I opened the box and to my surprise there wasn't a wire diagram! I've searched everywhere on the internet and nothing.
There are 4 spade terminals on the side of the solenoid. I have 4 wires to connect. The orange/white, red/white, and blue wires were all on the same small post on old solenoid. The other small post had the blue/white wire. What wire do I put on what spade terminal? Thanks for any help |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-27-2017, 11:02 PM | #2 |
Getting Wild
Join Date: Jul 2016
Location: Douglasville ,Ga
Posts: 117
|
Re: Need wiring help for Albright SW180 Solenoid
My wire colors were different on my 99 DS, there is a wiring diagram sticky at the beginning of the CC page, figure out which one your cart is and go by the diagram, the small wires that went to the positive small post terminal will now go to the positive spade terminal, you'll have to cut the ends and install female spade connectors, if you have a diode supplied with the solenoid , it will go on the back two spade terminals, the attached picture is from ScottyB's page on solenoids, he has some helpful info there as well .
|
05-28-2017, 05:34 AM | #3 |
Not Yet Wild
Join Date: Apr 2017
Posts: 2
|
Re: Need wiring help for Albright SW180 Solenoid
Thanks for the reply Transfixer! So I'll need to figure out which wires are + or - before throwing on spade terminals... I'll checkout ScottyB's page. Thanks for the diagram and lead.
|
05-28-2017, 07:21 AM | #4 |
Guest
Posts: n/a
|
Re: Need wiring help for Albright SW180 Solenoid
|
08-25-2020, 08:32 PM | #5 |
Not Yet Wild
Join Date: Aug 2020
Posts: 1
|
Re: Need wiring help for Albright SW180 Solenoid
I have a similar question but my sw180 didn’t come with a diode. Do I need to get one? I have attached pics of the old and new and I’m a little lost...
|
08-26-2022, 08:51 PM | #6 |
Not Yet Wild
Join Date: Jul 2022
Posts: 20
|
Re: Need wiring help for Albright SW180 Solenoid
posted to wrong thread
|
Tags |
spade terminals - wires? |
|
|
Similar Threads | ||||
Thread | Forum | |||
Dcx and sw180 solenoid install help | Electric EZGO | |||
19.8mph, PlumQuick Motor, Stock Controller, 4g wires and SW180 Sel. | Electric Club Car | |||
Albright 202 connect issue | Extreme DC! | |||
(WTS) Curtis Controller & Albright Solenoid | Golf Carts and Parts | |||
change from old style solenoid to an Albright | Electric Club Car |