|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
05-01-2018, 08:56 AM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2012
Location: Syracuse, NY
Posts: 8
|
Precedent wheel spacer does not fit
2010 precedent was stock as far as I know. bought 14" wheels and new low pro tires which mounted up fine, except the front rubs a little at full turn so bought some 2" wheel spacers off ebay that matched the 4x4 bolt pattern for Ezgo and Clubcar.
Went to install fronts and they do not slide all the way on, they go as far as say 1/2" to the rear of the hub. I tried them on my Ezgo cart and they installed perfect. Any advice? This is the product I bought. https://www.ebay.com/itm/4pc-2-Thick...72.m2749.l2649 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-01-2018, 09:50 AM
|
#2 |
|
Gone Wild
 Join Date: Feb 2013
Location: NC/SC
Posts: 1,012
|
Re: Precedent wheel spacer does not fit
it looks like you're going to have to machine the inside to fit over the CC hub.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Wheel spacer question | Electric EZGO | |||
| precedent wheel bearing spacer rubbing | Electric Club Car | |||
| Rear Wheel Studs too Short for 3 inch wheel Spacer | Electric EZGO | |||
| wheel spacer help!!!! | Electric EZGO | |||
| Wheel Spacer Question | On Road Golf Carts! | |||
Linear Mode
