|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-09-2020, 11:38 AM | #1 |
Not Yet Wild
Join Date: Jul 2016
Posts: 70
|
Rxv Curtis conversion throttle command
Just did a Curtis conversion on an old danaher rxv. Old controller melted so it wasn’t running when it came in.
Still isn’t running. Checked splice connections, brake is new and functional, new solenoid batteries are charged. On my handheld I am not getting a throttle command % reading. Mapped throttle is functioning throttle switch is good. Is it possible the new controller is defective, I know it’s possible but what else could it be? Not the controller either, tried a known working controller |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-09-2020, 11:58 AM | #2 | |
Not Yet Wild
Join Date: Jul 2016
Posts: 70
|
Re: Rxv Curtis conversion throttle command
Quote:
|
|
05-11-2020, 06:23 AM | #3 | |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: Rxv Curtis conversion throttle command
Quote:
If the controller is not from FSIP, replace the (throttle/brake/motor speed sensor) encoders and retest. There may be a blown encoder that is shorted and pulling down the 5V encoder supply. Bob |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G14 Throttle type on curtis 1204M | Electric Yamaha | |||
Navitas Vs. Curtis Conversion | Electric EZGO | |||
Curtis 1204 Throttle Input | Electric Club Car | |||
5 wire curtis throttle | Electric EZGO | |||
Need help with Curtis 1214 controller/throttle?? | Electric golf carts |