Mod z max charger

Mooncarter · 09-11-2021, 03:01 PM

Hello folks. I have a MOD Z MAX charger I have been using for several years now and quite satisfied with it.

I bought another for my daughter's DS 48v. While at the campground recently hers stopped working. No big immediate problem, we just used mine on both of our carts. I deduced it must be the charger plug end that goes into the cart. So I ordered and have replaced the end. Plugged it in and to my surprise it still did not work. Upon closer inspection I realized that the fuse and fuse holder are missing.

Has anybody ever had to replace the fuse/fuse holder? I cannot find the part anywhere on the internet.

Much thanks for any help.

R&TBabich · 09-11-2021, 04:32 PM

Quote:

Originally Posted by Mooncarter

.... Has anybody ever had to replace the fuse/fuse holder? I cannot find the part anywhere on the internet. ....

Do you have a pic of where the missing part was?
I have been using 2 of these for a year and didn't know they have a fuse.
It's not shown or talked about in the Owner's Manual.

Mooncarter · 09-11-2021, 04:45 PM

Quote:

Originally Posted by R&TBabich

Do you have a pic of where the missing part was?
I have been using 2 of these for a year and didn't know they have a fuse.
It's not shown or talked about in the Owner's Manual.

Look at the other end (not where the flashing light is) and you will see it. About the size of a dime.

Mooncarter · 09-11-2021, 04:56 PM

Here.

R&TBabich · 09-11-2021, 07:09 PM

Quote:

Originally Posted by Mooncarter

Here.

Thanks, I thought that's what that was, but it's not marked "FUSE" or anything.
Does it screw in/out or pressed in?
Does it use a standard fuse.
I'm guessing since it's waterproof the fuse cap is sitting in an O-ring or grommet.

Mooncarter · 09-11-2021, 07:52 PM

Quote:

Originally Posted by R&TBabich

Thanks, I thought that's what that was, but it's not marked "FUSE" or anything.
Does it screw in/out or pressed in?
Does it use a standard fuse.
I'm guessing since it's waterproof the fuse cap is sitting in an O-ring or grommet.

I spun it several times and it does not seem to move. I pressed in and tried turning. No luck. Not going to mess with it anymore because we are in the middle of nowhere and if I mess this one up we won't have a charger at all.

To top it all off the TXT you see in the background is mine and that charger took a dump too. I'm charging it (36v) with a 12 volt charger now.

09-11-2021, 03:01 PM	#1
Mooncarter Gone Insane Join Date: Oct 2016 Location: Richmond, VA Posts: 14,215	Mod z max charger Hello folks. I have a MOD Z MAX charger I have been using for several years now and quite satisfied with it. I bought another for my daughter's DS 48v. While at the campground recently hers stopped working. No big immediate problem, we just used mine on both of our carts. I deduced it must be the charger plug end that goes into the cart. So I ordered and have replaced the end. Plugged it in and to my surprise it still did not work. Upon closer inspection I realized that the fuse and fuse holder are missing. Has anybody ever had to replace the fuse/fuse holder? I cannot find the part anywhere on the internet. Much thanks for any help.

Similar Threads
Thread	Forum
Charger/Disable wiring from Navitas Tac 2 to Lester II onboard charger	Electric EZGO
Moving to a 48v charger on ezgo, 3 wires on plug, 2 on charger, will it work?	Electric EZGO
Powerwise charger w/ Club Car round three prong charger plug HOT!!	Electric EZGO
new batts and charger wont charge, charger works on other carts	Electric Club Car
How to hook up 12volt charger with 36 volt charger to charge 48 volts	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum