lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 06-11-2022, 03:21 AM   #1
Geemonty
Not Yet Wild
 
Join Date: Jun 2022
Posts: 49
Default Curtis 1510 to Alltrax XCT48300 wiring question

my old Curtis controller failed. I have received my new Alltrax 300 amp XCT48300 IQ controller. All the wiring is straight forward except on my old Curtis I have this 4 pin connector that I don't have on the alltrax.



I couldn't find any info on this. The only thing I found on this 4 pin connector was that it is to program the controller, is this correct? Do I need this for the new alltrax?
Geemonty is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 06-11-2022, 04:12 AM   #2
ojo
Gone Wild
 
ojo's Avatar
E-Z-GO
 
Join Date: Sep 2020
Location: Germany
Posts: 2,000
Default Re: Curtis 1510 to Alltrax XCT48300 wiring question

Programming of the Alltrax is done with a laptop and the Toolkit software via usb cable.
ojo is offline   Reply With Quote
Old 06-11-2022, 01:11 PM   #3
Geemonty
Not Yet Wild
 
Join Date: Jun 2022
Posts: 49
Default Re: Curtis 1510 to Alltrax XCT48300 wiring question

Yes the alltrax instructions has that listed. What I am wondering is does this have to be connected on my CC? There is a 4 pin connector on my wiring harness that did connect to the old controller. I have been going over the wiring and it doesnt look like it needs to be connected for anything.
Geemonty is offline   Reply With Quote
Old 06-11-2022, 03:00 PM   #4
kgsc
Gone Wild
 
kgsc's Avatar
Mixed Breed
 
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
Default Re: Curtis 1510 to Alltrax XCT48300 wiring question

That is the programming port for the Curtis. Extends to the round plug underneath the dash. Not needed with the Alltrax.
kgsc is offline   Reply With Quote
Old 06-11-2022, 04:12 PM   #5
Geemonty
Not Yet Wild
 
Join Date: Jun 2022
Posts: 49
Default Re: Curtis 1510 to Alltrax XCT48300 wiring question

Awesome thanks! I was pretty sure it wasn't needed, there seems to be no technical documents about club car I can find freely anywhere.
Geemonty is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car




Similar Threads
Thread Forum
Curtis 1510-5201 Controller Wiring Electric golf carts
Curtis 1510-5201 Repair Question Electric Club Car
Impact of Alltrax XCT48300? Electric Club Car
Alltrax XCT48300 For Sale (YDRE) Golf Carts and Parts
Curtis PMC 1510-5201 Electric EZGO


All times are GMT -5. The time now is 05:47 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.