07-16-2010, 11:03 AM | #1 |
Not Yet Wild
Join Date: Oct 2008
Location: s.e. kansas
Posts: 4
|
fe 290 not stoping
i just rebuilt the fe290 motor in my '92 club car. the motor runs great, but does not shut off when releasing the acclerator pedal. ive checked all the wiring on the engine and im sure its all correct. pulling fuse and disconecting battery well not stop it, only chocking it out. anyone have any ideas? im at a loss.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-16-2010, 11:05 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: fe 290 not stoping
It could be a bad kill switch micro in the little black box.... at the end of your throttle peddle linkage.... open the box. The kill switch is the micro switch on the bottom of the stack.
Welcome to BGW! |
07-16-2010, 12:49 PM | #3 |
Not Yet Wild
Join Date: Oct 2008
Location: s.e. kansas
Posts: 4
|
Re: fe 290 not stoping
i tested that micro, its good. its gotta be something on the motor i got crossed up, nothing on the cart wiring side will kill the motor. i guess i am going to have to take every thing off to get down to the motor wiring.
thanks for the quick reply. ill let you know if i figure it out. |
07-16-2010, 01:18 PM | #4 |
Respect the Cart
Join Date: May 2010
Location: Rocky Mount, Virginia
Posts: 2,190
|
Re: fe 290 not stoping
When you start it, does it fire up as soon as you turn the key or do you still need to press the accerlerator to make it start?
|
07-16-2010, 02:20 PM | #5 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: fe 290 not stoping
check to make sure solenoid isn,t stuck..................................
|
07-16-2010, 02:23 PM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: fe 290 not stoping
....and check to see you have a good ground cable connection to the motor .... did you forget to connect it?
|
07-16-2010, 03:33 PM | #7 |
Not Yet Wild
Join Date: Oct 2008
Location: s.e. kansas
Posts: 4
|
Re: fe 290 not stoping
scottyb wins, after much tracing and tracking of wires, finally decided to hook the ground cable, that had brooken and dangling from the frame for years, to the block and whata know. thanks everyone for the help
|
07-17-2010, 03:13 PM | #8 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: fe 290 not stoping
|
07-17-2010, 03:28 PM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: fe 290 not stoping
Lol I learned that from the Shadowman
|