|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-01-2010, 07:26 PM | #11 |
Gone Wild
Join Date: Oct 2010
Location: Folsom, LA
Posts: 470
|
Re: 1995 Medalist Rebuild
Thanks ScottyB. It did not have them when I got it so I am not sure how they mount. I will have to look for a picture and add whatever is necessay.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-01-2010, 08:01 PM | #12 |
no clue
Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
|
Re: 1995 Medalist Rebuild
ole, mine looks similar build wise. you are going to love it. good luck!
jim |
11-02-2010, 08:03 AM | #13 |
Gone Wild
Join Date: Oct 2010
Location: Folsom, LA
Posts: 470
|
Re: 1995 Medalist Rebuild
Madoc, How did you do the posi rear end. Axle swap or is there a kit? I will be using mine mainly for hunting.
|
11-02-2010, 09:32 AM | #14 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 1995 Medalist Rebuild
This should help....
|
11-02-2010, 11:45 AM | #15 |
Gone Wild
Join Date: Oct 2010
Location: Folsom, LA
Posts: 470
|
Re: 1995 Medalist Rebuild
Thanks ScottyB. It looks like the tabs are on each side of the middle battery. Thats easy enough.
|
11-02-2010, 05:05 PM | #16 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 1995 Medalist Rebuild
& about a 3/8th hole for the 5/16th rod to hook in...... bet you need some holddowns too With 8v batteries you have to cut the hold down in half and install 2 separate pcs.
|
11-02-2010, 07:03 PM | #17 |
Gone Wild
Join Date: Oct 2010
Location: Folsom, LA
Posts: 470
|
Re: 1995 Medalist Rebuild
MOunted my new Controller, Solenoid and F/R switch. Now its time to start wiring. Having a little disagreement between my drawings and the ones that came with the controller.
|
11-02-2010, 07:09 PM | #18 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 1995 Medalist Rebuild
I see we are starting form scratch
Tell me you have a key switch & wires coming out of the peddle box Okay so per our PMs you are going to send me some drawings you made of what was there before you stated.... and the diagram Logisystem sent you.... the big question being what to do with the old A2 cables..... this is pretty straight forward.... send me what you got and I will give you what you need .... Try that at EVcloud |
11-02-2010, 07:29 PM | #19 |
no clue
Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
|
Re: 1995 Medalist Rebuild
ole- had my eyes dilated today so barely see the comp. manana jim
|
11-02-2010, 07:34 PM | #20 |
Gone Wild
Join Date: Oct 2010
Location: Folsom, LA
Posts: 470
|
Re: 1995 Medalist Rebuild
ScottyB, I do not have a key switch, but I do have the wires coming from the pedal box. I will be ordering a new key switch, so if you can explain how this is going to be wired that would be fantastic. I did download the service manuals from this site so it is probably in there.
Madoc, Manana Jim? Is this the kit for Posi traction, Thanks, David J. |
|
|
Similar Threads | ||||
Thread | Forum | |||
1992 Marathon vs. 1995 Medalist | Electric EZGO | |||
1995 gas ezgo marathon | Gas EZGO | |||
Marathon 350 rebuild ? | Gas EZGO | |||
94 Marathon rebuild | Electric EZGO | |||
EZGO 1995 295cc oil leak after rebuild | Gas EZGO |