|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-08-2010, 10:06 PM | #1 |
Not Yet Wild
Join Date: Jul 2010
Posts: 53
|
1/2 reverse
how do i unhook the 1/2 reverse on a marathon
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-08-2010, 10:32 PM | #2 |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: 1/2 reverse
Did a small search and found this thread, scroll down it may help you.
LH http://www.buggiesgonewild.com/elect...ller-pins.html |
11-08-2010, 11:25 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: 1/2 reverse
I think it always the 4th pin
1st pin positive power 2nd & 3rd = throttle input 4th is half wit reverse |
11-08-2010, 11:34 PM | #4 |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: 1/2 reverse
I thought it was, but I do not have a manual for a marathon, so I searched it out, best I could help him with.
|
11-08-2010, 11:41 PM | #5 |
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: 1/2 reverse
Marathon carts controlled Half speed reverse via the PB-16 pot box. There is a set of wires running from the pot box to the F&R assembly. In order to disable the half speed reverse, simply unplug the 2 wires from the micro on the F&R (hint, it should be the "double" micro).
|
11-08-2010, 11:54 PM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: 1/2 reverse
How does that work?
|
11-09-2010, 12:48 AM | #7 |
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: 1/2 reverse
there is a resistor inside the PB-16 that cuts the output in half when the circuit is closed on the F&R micro. Similar to the resistor located in line to the F&R of a 48 volt club car that has a V-Glide.
|
11-09-2010, 12:51 AM | #8 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: 1/2 reverse
Thanks ! I see....
|
11-09-2010, 12:56 AM | #9 |
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: 1/2 reverse
Funny side note.....
In the thread Mark posted, the issue they were all having is that the controller they were attempting to use was designed for the ITS throttle system, not the PB-16 system they were attempting to use it on. |
11-09-2010, 06:08 PM | #10 |
Not Yet Wild
Join Date: Jul 2010
Posts: 53
|
Re: 1/2 reverse
thanks for the help everyone
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
reverse | Gas EZGO | |||
wiring a reverse light to the reverse buzzer? | Gas Yamaha | |||
? about reverse | Extreme DC! | |||
No Reverse | Electric Yamaha |