|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-07-2011, 09:07 AM | #1 |
Getting Wild
Join Date: Jun 2011
Location: SoCal / Torrance
Posts: 80
|
Brakes, oh I dont have any.....
Okay, this is a new cart to me and I know very little about these things. I’m learning new stuff every day, Thx BGW!!!
To the point: My cart’s brakes suck!! Is there an adjustment for them? What’s the best way to check if they need to be replaced? I’m gonna look into them this weekend so any suggestions would be greatly appreciated. Thx |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-07-2011, 10:03 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Brakes, oh I dont have any.....
Remove the drum for a visual inspection... note the pad thickness difference between the lower end of the front pad compared to the top end of the rear shoe... This will give you a visual on how much shoe is left. With eye protection on and your mouth closed
Spray brake clean on everything..... use a drip pan to catch the mess... Check the drum for damage... Reinstall the drum and torque the castle nut to 100-140 ft pounds...( MUST BE VERY TIGHT!) Make shoe adjustment thru the hole in the drum at the star adjuster... with the aid of a flashlight. Check cable adjustment at the equalizer, check parking brake operation... and test drive. |
07-07-2011, 10:06 AM | #3 |
Getting Wild
Join Date: Jun 2011
Location: SoCal / Torrance
Posts: 80
|
Re: Brakes, oh I dont have any.....
Awesome!!! Thx for all the help Scotty!!
|
07-07-2011, 06:58 PM | #4 |
Gone Wild
Join Date: Mar 2010
Location: Hampton, VA
Posts: 503
|
Re: Brakes, oh I dont have any.....
"Reinstall the drum and torque the castle nut to 100-140 ft pounds...( MUST BE VERY TIGHT!) "
Scotty is right, ohwhofarted just had to buy a new drum due to a loose nut/helpful mechanic. If you can't get it tight, don't try to drive it! Last edited by arcitech; 07-07-2011 at 06:58 PM.. Reason: quote marks |
07-07-2011, 09:11 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Brakes, oh I dont have any.....
You got that right! It's gonna strip if it ain't tight... And tighter is better. So never, NEVER back off an Ezgo axle nut to get the cotter pin in the hole
|
07-07-2011, 09:15 PM | #6 |
Let's go racin' boyz!!
Join Date: Oct 2010
Location: Springdale, AR
Posts: 4,156
|
Re: Brakes, oh I dont have any.....
Torque to 1/2" impact, right?
|
07-07-2011, 11:43 PM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Brakes, oh I dont have any.....
|
07-08-2011, 06:15 AM | #8 |
Let's go racin' boyz!!
Join Date: Oct 2010
Location: Springdale, AR
Posts: 4,156
|
Re: Brakes, oh I dont have any.....
|
07-08-2011, 08:22 AM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Brakes, oh I dont have any.....
|
07-08-2011, 08:29 AM | #10 |
Let's go racin' boyz!!
Join Date: Oct 2010
Location: Springdale, AR
Posts: 4,156
|
Re: Brakes, oh I dont have any.....
|
|
|
Similar Threads | ||||
Thread | Forum | |||
I dont know what is going on | Electric EZGO | |||
Please help! Brakes dont work after replacing 81 G1 | Gas Yamaha | |||
I Dont Know What I Have | Gas Yamaha | |||
dont ever do this | Videos | |||
dont know anything | Gas Yamaha |