solenoid does not click

[Broadslab]

I had to pull the F&R apart in order to tighten the wire from the controller to the bottom large post. When i put it back together, I get nothing,no click no movement. This is an 06 series 36 volt cart. I have no idea where to look next

[Broadslab]

Since my first post I checked the solenoid, and it's working.

[Broadslab]

Is it something I did?? No help?

[Knothead]

Originally Posted by Broadslab

Is it something I did?? No help?

If it worked before you disassembled it, it HAS to be something you did!

I think it's possible to assemble it 90° out of correct position, which renders it inoperable. Not sure where I saw this information......maybe ScottyB's site (www.cartsunlimited.net)

i think this is 06 txt f/r switch

Originally Posted by JohnnieB

Here's a generic diagram of a series motor drive, less the interlocks and throttle.
As you see, there isn't much too it.

[Broadslab]

Thank ya, thank ya, thank ya. Knothead you are a life saver. I took it back apart and I had reassembled it 180 degrees off. All's well in Mudville.

[Knothead]

Glad you got it going!