07-20-2018, 01:27 PM | #1 |
Not Yet Wild
Join Date: May 2018
Posts: 10
|
Gov failure to activate
Hey guys so I had someone replace a bearing in the gearbox of a 2008 DS and now the governer fails to kick in at all. Would anyone have ideas how I can fix this? The cables are all attached properly and not damaged. I’m suspecting a failure inside the gearbox since it was working properly prior.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-20-2018, 01:41 PM | #2 |
Gone Wild
Join Date: Jun 2011
Location: Northern Indiana
Posts: 2,827
|
Re: Gov failure to activate
If the cables and linkage you see externally are in place the problem is internal. Something was either put together wrong or left out. Either way the rear end will have to come apart.
|
07-20-2018, 03:06 PM | #3 |
Not Yet Wild
Join Date: May 2018
Posts: 10
|
Re: Gov failure to activate
Do you an idea of what to look for? I’m gonna do it myself and I have little experience with gearbox’s
|
07-21-2018, 07:50 AM | #4 |
Gone Wild
Join Date: Jun 2011
Location: Northern Indiana
Posts: 2,827
|
Re: Gov failure to activate
It just occurred to me that it may not have been set and tightened down when the work was done. Check this: Put the cart in "maintenance". With engine cold enough to put your hand back there check to see if the pinch bolt on the governor arm is tightened. See if the vertical rod for the governor moves any when you speed up the engine.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
New controller and now solenoid won't activate | Electric EZGO | |||
Solenoid wont activate. Please Help!!! | Electric EZGO | |||
2009 RXV will not activate charger | Electric EZGO | |||
48V DS, solenoid wont activate ? | Electric Club Car | |||
DCS solenoid will not activate | Electric EZGO |