txt will not move

[johnny1991]

I have a newer model txt, when i push the gas the silonid clicks but the cart does not move, i have tested all of the microswitches including the one under the floormat, the silonid has 36v, the control box has 36v in and out, but when i test the motor i get nothing. i am now starting to think it could be the Forward & Reverse Switch Assembly where the four thick black cables
run to the motor form, does this sound plausible? if so what do those cables do, and how do i test them?

[rusty]

Welcome to the forum johnny1991..................

You will probably find one of two things wrong.............

1> The cables have got to be tight! You may very well have a loose cable or corroded cable.

2> the F/N/R switch could be dirty or burned. However, most of the time it only affects forward and reverse is ok or vice versa.

If you havent removed and cleaned the terminals/cables and tightened them where you can TUG on them and they don't move, you probably need to do so.