|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-05-2007, 09:58 PM | #11 |
Not Yet Wild
Join Date: Jul 2007
Posts: 45
|
Re: Just to hello and thanks for the forum !
Man, ya`ll are great, if you don`t mind, please explain what is involved in lifting the front and rear of this 02, sorry to ask such dumb questions , but I don't`have a clue, please let me know what is the best way you suggest , thanks, Milo
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-05-2007, 10:18 PM | #12 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
Re: Just to hello and thanks for the forum !
On the rear axle, you have two half-circle shaped spring "holders" that are holding the spring on the bottom of the axle. Flip those over where the spring is on TOP of the axle.
The front will need lift blocks, for the axle weldment is no longer liftable without them. |
07-06-2007, 09:02 AM | #13 |
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: Just to hello and thanks for the forum !
Does your cart have the steering rack bolted to the front axle?
|
07-08-2007, 09:03 PM | #14 |
Not Yet Wild
Join Date: Jul 2007
Posts: 45
|
Re: Just to hello and thanks for the forum !
What`s the best way, putting in blocks or buying a new axle, tell me the pros and cons of each ! thanks Milo
|
07-08-2007, 09:05 PM | #15 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
Re: Just to hello and thanks for the forum !
Blocks are an econo lift. A new axle would be my way-of-choice.
|
07-10-2007, 07:09 AM | #16 |
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: Just to hello and thanks for the forum !
I don't think you can use the block lift cause the way the steering is made, however it looks like your much better off listening to "No Know" about that, than someone who has done it before. good luck with your cart
|
07-10-2007, 07:24 AM | #17 |
Gone Wild
Join Date: Dec 2006
Location: St. Johns /Jacksonville
Posts: 2,383
|
Re: Just to hello and thanks for the forum !
Go with a drop front axle or front spindle lift!!
|
07-10-2007, 07:25 AM | #18 |
Gone Wild
Join Date: Dec 2006
Location: St. Johns /Jacksonville
Posts: 2,383
|
Re: Just to hello and thanks for the forum !
P.S. let me know what you need!!!
|
07-10-2007, 07:36 AM | #19 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
Re: Just to hello and thanks for the forum !
My vote goes to a spindle lift.
Oh, and yes, contact tungpo!!!!! |
07-10-2007, 07:48 AM | #20 |
Gone Wild
Join Date: Dec 2006
Location: St. Johns /Jacksonville
Posts: 2,383
|
Re: Just to hello and thanks for the forum !
I agree spindle
|