|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
01-10-2009, 06:55 PM | #1 |
Smoov az a gravy sammich
Join Date: Oct 2008
Location: Limestone, Illinois
Posts: 3,462
|
Yamaha Governor/torque kit
I am curious on how to bypass a governor on a G1. Any help would be appreciated!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-10-2009, 07:46 PM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,046
|
Re: Yamaha Governor/torque kit
Have you tightened the adjustment screw all the way?
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
01-11-2009, 09:02 AM | #3 |
Smoov az a gravy sammich
Join Date: Oct 2008
Location: Limestone, Illinois
Posts: 3,462
|
Re: Yamaha Governor/torque kit
Is the adjustment screw located on the governor itself or the linkage from the governor to the carb? I have the linkage all way out...
|
01-11-2009, 07:34 PM | #4 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,046
|
Re: Yamaha Governor/torque kit
The philiips screw on the governor lever on top of the rear end. Turn it in to increase speed.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
01-11-2009, 08:13 PM | #5 |
Gone Wild
Join Date: Jan 2009
Location: Meridian,MS
Posts: 183
|
Re: Yamaha Governor/torque kit
I took the locknut off and ran the screw all the way in. Made all the diff in the world on mine.
|
01-11-2009, 08:15 PM | #6 |
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: Yamaha Governor/torque kit
it should thats the gov lol
|
01-12-2009, 08:20 AM | #7 |
Smoov az a gravy sammich
Join Date: Oct 2008
Location: Limestone, Illinois
Posts: 3,462
|
Re: Yamaha Governor/torque kit
Awesome! Thanks guys! Im kind of a moron when it comes to finding the right parts to adjust! I'll let you guys know! Also, to install a converter power spring kit, do I need to take the inner sheave off?
|
01-12-2009, 10:11 AM | #8 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,046
|
Re: Yamaha Governor/torque kit
Yes, the driven clutch will have to be removed completely.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
01-12-2009, 10:26 AM | #9 |
Smoov az a gravy sammich
Join Date: Oct 2008
Location: Limestone, Illinois
Posts: 3,462
|
Re: Yamaha Governor/torque kit
ok. thanks
|
03-03-2009, 02:45 AM | #10 |
Gone Wild
Join Date: Feb 2009
Location: Sanger, Ca.
Posts: 1,689
|
Re: Yamaha Governor/torque kit
Does anyone have a good picture of the adjustment screw?
Thanks Don M. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Governor rod adjustment | Gas Club Car | |||
Yamaha governor bypass | Gas Yamaha | |||
Electric Torque vs Gas Torque | Electric Club Car | |||
Yamaha Torque Kit Instructions | Gas Yamaha | |||
82 G2 Governor Bypass | Gas Yamaha |