|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-21-2015, 04:57 PM | #1 |
Not Yet Wild
Join Date: Mar 2015
Posts: 5
|
Pull switch/foot switch voltage
I ordered a converter from Scotty, and was going to use it to power some LED lights. I'd like to keep the pull switch to turn them on, and foot switch to alternate between a pair of red LEDs and a pair of white ones. I can't find anywhere that states max voltage of the switches. They've got 8ish volts running through them now, I assume 12 won't be an issue, but I figured I'd ask here to make sure.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-21-2015, 05:12 PM | #2 |
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: Pull switch/foot switch voltage
You'll be fine running 12v through them, they should be 12v switches.
|
04-22-2015, 01:13 AM | #3 |
Not Yet Wild
Join Date: Mar 2015
Posts: 5
|
Re: Pull switch/foot switch voltage
I figured they were, but knowing my luck if I didn't ask, I'd have wound up with a really expensive bonfire.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
push pull light switch wiring | Electric Club Car | |||
how to wire a foot operated dimmer switch? | Electric Club Car | |||
81 g1 foot stop switch | Gas Yamaha | |||
2000 EzGo foot Pedal Micro Switch | Electric EZGO | |||
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! | Gas Yamaha |