04-22-2016, 04:48 PM | #1 |
Gone Wild
Join Date: Nov 2009
Location: mi
Posts: 766
|
1993 ezgo valve?
Hi I am in need of replacing the intake valves on my ezgo 1993 marathon was wondering if I can pull the head of the motor without having to renove the engine from the cart thanks much
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-22-2016, 10:53 PM | #2 |
Gone Wild
Join Date: Apr 2015
Posts: 256
|
Re: 1993 ezgo valve?
I saw one in the junk yard with the engine block in and no head.
I do not know if it was properly disassembled without any damage. Most engines i usually always pull the whole engine to clean, paint, rering, and reseal. Usually if the valves are concave then you need a full overhaul. Guides, seat ground, Rings, bored out, bearings, sometimes a new cam. If you just burnt or bent a valve thats different. |
04-23-2016, 08:15 AM | #3 |
Gone Wild
Join Date: Nov 2009
Location: mi
Posts: 766
|
Re: 1993 ezgo valve?
I would think retiring it would be the biggest issue but your right mind as well just pull the engine
|
04-25-2016, 10:39 PM | #4 |
Getting Wild
Join Date: Oct 2010
Location: Michigan
Posts: 117
|
Yes you can remove the head with out pulling the motor.
|
04-29-2016, 09:49 AM | #5 |
Gone Wild
Join Date: Mar 2013
Location: DORR MI
Posts: 230
|
Re: 1993 ezgo valve?
pull head and do a valve grind, check seats at that point. put new valve seals in while your in there. these engines are pretty much fail proof. I really like rebuilding them. they are great little engines
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Picture of EZGO 295 bad valve, just so you all can see | Gas EZGO | |||
briggs vtwin valve oil seal which valve | Big Block Talk! | |||
EZGO valve timer | Gas EZGO | |||
1993 ClubCar Ds Valve Questions | Gas Club Car | |||
Bad intake valve on a '94 EZGO | Gas EZGO |