|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-04-2017, 05:41 AM | #1 |
Getting Wild
Join Date: Nov 2016
Location: Kalamazoo Michigan
Posts: 132
|
Post 5" lift gas P2 problems
I lifted my cart 5 inches the other day. I have a 1988 EZGO marathon gas. I put a brand new belt on the exact same size...only made this belt for the 88. The belt seems to fit much looser than before the lift...I put old belt back on same thing. So my question is...when doing a 5 inch block lift does it change the pitch/angle between the primary clutch and the axle drive making the belt shorter. I have brand new engine mounts and those are solid and cranked down well. Any one else experienced this problem and if so what belt should I go with now?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-04-2017, 07:09 AM | #2 |
Getting Wild
Join Date: Nov 2016
Location: Kalamazoo Michigan
Posts: 132
|
Re: Post 5" lift gas P2 problems
Cart is still on stock 8 inch rims/tires as well
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
problems with 6" a arm lift kit | Lifted Golf Carts | |||
All sport 5" lift for workhorse problems. | Lifted Golf Carts | |||
problems on an all sports 6" a arm lift on cc ds 07 | Lifted Golf Carts | |||
Steering problems after 6" lift and extension plate | Lifted Golf Carts | |||
new 6" lift problems | Gas EZGO |