|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-24-2017, 09:20 PM | #11 |
WE ARE! PENN STATE!
Join Date: Mar 2014
Location: State College,PA
Posts: 388
|
Re: Club Car Precendent controller upgrade
I just installed one by myself. It wasn't awful. It would be much easier if I didn't have on the rear body or rear seat. I pulled the cart onto my truck to get better access underneath. Drilling it is the hardest part. The rest is just labeling wires. I had to crimp two rings on the end of wires. The rest just bolts in. My Alltrax was tuned down to 400amps for me when I purchased it so I didn't burn up my stock motor. It will lift my front tires off the ground with the torque.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-24-2017, 10:09 PM | #12 |
Gone Wild
Join Date: Apr 2015
Location: NorCal
Posts: 718
|
Re: Club Car Precendent controller upgrade
It can be done from the back through the motor access cover on 2008.5 and newer with 6x8v batteries but I found it easier to remove the two middle batteries. Your 4x12v might be even easier as the controller is in the middle, not the back.
|
08-25-2017, 03:15 PM | #13 |
Not Yet Wild
Join Date: Jul 2017
Location: Kansas City, MO
Posts: 71
|
Re: Club Car Precendent controller upgrade
Not too bad of an install. Take a lot of pictures before you touch anything. Makes it easier when you have wiring questions. I would recommend getting the 2gauge wiring upgrade also. Gets the juice flowing better. Less resistance and gets the full potential of the Alltrax.
ScottyB @ carts unlimited has a great wiring combo kit with a diagram showing where each wire goes. Little $$ but the cables are top notch. When you first open it up it will look a little daunting. Just take it step by step. Looks like a lot of wires but it's not as bad as it seems. I used painters tape and labeled wires before I removed them also. And then with the new 2gauge I labeled them with what color wire they were replacing. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Upgrade stock club car controller | Electric Club Car | |||
Club car Motor and amp controller upgrade | Electric Club Car | |||
club car series ds controller upgrade | Electric Club Car | |||
Club Car IQ controller upgrade to alltrax dcx600 | Electric Club Car | |||
club car regen speed controller upgrade | Electric Club Car |