|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
09-18-2017, 04:52 PM
|
#21 |
|
Getting Wild
Join Date: Sep 2012
Location: South FL
Posts: 103
|
Re: Alltrax xct 400 pds blink codes
Well I tested for continuity with the controller powered up. Testing A2 to F1 then F2 I had no continuity.
Testing A1 to F1 then F2 I had a split second of a beep for continuity on both F1 and F2. Then no continuity with the probes held on the cables. I have not scratched and sniffed yet! Sent from my iPhone using Tapatalk |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-18-2017, 07:10 PM
|
#22 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Alltrax xct 400 pds blink codes
Why controller on ? This test is done with all 4 motor wires disconnected.
|
|
|
|
|
09-18-2017, 07:31 PM
|
#23 |
|
Getting Wild
Join Date: Sep 2012
Location: South FL
Posts: 103
|
Re: Alltrax xct 400 pds blink codes
They were disconnected but I then turned the controller on to test. I just tested them with it off and no continuity from F to A.
Sent from my iPhone using Tapatalk |
|
|
|
|
09-19-2017, 06:26 AM
|
#24 |
|
Getting Wild
Join Date: Sep 2012
Location: South FL
Posts: 103
|
Re: Alltrax xct 400 pds blink codes
And yes I tested the terminals on the motor. See I'm getting the hang of this[emoji106]
Sent from my iPhone using Tapatalk |
|
|
|
|
09-19-2017, 08:55 AM
|
#25 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Alltrax xct 400 pds blink codes
I'm stumped. Hook everything back up and call Alltrax 541-476-3565
|
|
|
|
|
09-19-2017, 09:29 AM
|
#26 |
|
Getting Wild
Join Date: Sep 2012
Location: South FL
Posts: 103
|
Re: Alltrax xct 400 pds blink codes
I bet you don't get to say that much
 Is there anyway it could be the micro switch? It does click though when the pedal is pushed. I'm definitely getting balder!! |
|
|
|
|
09-19-2017, 10:32 AM
|
#27 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Alltrax xct 400 pds blink codes
Sometimes a critical piece of information is missing.
Alltrax should be open now |
|
|
|
|
09-19-2017, 04:38 PM
|
#28 |
|
Getting Wild
Join Date: Sep 2012
Location: South FL
Posts: 103
|
Re: Alltrax xct 400 pds blink codes
Well I called Alltrax and Ron(Nice guy) walked me through a couple things and turns out I have a bad motor[emoji30]
I checked the B- to B+ and had good voltage. He then had me check voltage on M- (J9) to B- and I had 1.3 V. So no voltage really coming back from the motor. Any motor suggestions? By the way I did put 22 inch tires on it a while ago. Something needs to push-em. At least I stopped going bald! Sent from my iPhone using Tapatalk |
|
|
|
|
09-19-2017, 06:21 PM
|
#29 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Alltrax xct 400 pds blink codes
I suspected as much, for PDS use the Admiral B2 for hills or for mostly flat (more speed)
Admiral D2 or FSIP B3 http://www.cartsunlimited.net/motors.html |
|
|
|
|
09-20-2017, 06:33 AM
|
#30 |
|
Getting Wild
Join Date: Sep 2012
Location: South FL
Posts: 103
|
Re: Alltrax xct 400 pds blink codes
Isn't the Admiral D2 for a 48v? Mine is 36 V.
Sent from my iPhone using Tapatalk |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Alltrax SPM 48300 EZ 4 blink green | Electric EZGO | |||
| Alltrax DCX300 blink code low voltage & motor overheating | Electric Club Car | |||
| 600 amp alltrax error codes | Electric EZGO | |||
| Alltrax SPM no error codes but not working | Extreme DC! | |||
| Blink codes for 48V DS | Electric Club Car | |||
Linear Mode
