|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-18-2017, 03:57 PM | #11 |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: Trojan T-875 battery cable routing
I would have reversed the first row batteries. Then placed the main pack + and - connections first row outer, then go from the inner connections of that row to the inner of the next row, then outer of that row to outer of the last row, then a short jumper inner to inner in that last row. Lessens the amount of inter-battery cable used a bit and lowers the amount of Kilowatt/Hours at the point of close proximity connections by 1/3rd. The main + and - cables look long enough for that configuration.
Sorry, it's just the engineer in me leaking out |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-19-2017, 05:45 AM | #12 |
Gone Wild
Join Date: Jul 2015
Posts: 161
|
Re: Trojan T-875 battery cable routing
|
09-19-2017, 05:47 AM | #13 | |
Gone Wild
Join Date: Jul 2015
Posts: 161
|
Re: Trojan T-875 battery cable routing
Quote:
This was my other thought the blue tape is one I would have to make Sent from my iPhone using Tapatalk |
|
09-19-2017, 06:39 AM | #14 |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: Trojan T-875 battery cable routing
Sorry, I was not watching this thread before. I've been trying to work out my own repower project. I bought a 6 X 8V aluminum battery tray to replace the plastic 4 X 12V battery tray in my old 2008 RXV Shuttle 2+2. I really wanted to go LiFePO4 but not seeing anything I like.
If you use that layout, you could reduce high current wire length, which reduces I*R losses in those wires. That delivers a bit more power to the motor, and a bit less power is lost in the high current wires. |
09-21-2017, 12:52 PM | #15 |
Gone Wild
Join Date: Jul 2015
Posts: 161
|
Re: Trojan T-875 battery cable routing
Thanks to everyone for your input. I decided to move around the batteries as suggested and I went ahead and made some new cables. Should be all good now!! Just working on the battery hold down now and I'll be all set!!! Thanks again!!! This is a great forum!!!
Sent from my iPhone using Tapatalk |
09-21-2017, 06:12 PM | #16 |
Gone Wild
Join Date: Feb 2017
Location: Richmond, TX
Posts: 1,026
|
Re: Trojan T-875 battery cable routing
Just make sure this bar does not rub on the cable.
Might have to rotate the cable a little. |
09-21-2017, 07:06 PM | #17 | |
Gone Wild
Join Date: Jul 2017
Location: Baton Rouge
Posts: 350
|
Re: Trojan T-875 battery cable routing
Quote:
Looks good. What size cable did you use and how are the ends attached? Crimped or soldered? |
|
09-21-2017, 07:13 PM | #18 |
Gone Wild
Join Date: Jul 2015
Posts: 161
|
Re: Trojan T-875 battery cable routing
|
09-21-2017, 07:13 PM | #19 |
Gone Wild
Join Date: Jul 2015
Posts: 161
|
Re: Trojan T-875 battery cable routing
|
09-22-2017, 06:07 AM | #20 |
Gone Wild
Join Date: Feb 2017
Location: Richmond, TX
Posts: 1,026
|
Re: Trojan T-875 battery cable routing
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Can someone show me the proper routing of throttle cable? | Gas Yamaha | |||
2002 DS IQ cable upgrade/routing | Electric Club Car | |||
routing the throttle cable from govenor to carb? | Gas EZGO | |||
Shifter Cable Routing After 6" Lift? | Lifted Golf Carts | |||
battery cable routing | Electric Club Car |