|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-21-2017, 12:23 PM | #1 |
Not Yet Wild
Join Date: Aug 2017
Posts: 5
|
85 EZGO ignition key switch diagram help
Hi, I have an 85 EZGO 3 wheeler that I just bought. It needed new batteries, so I pulled the old ones and attempted to "clean up" some of the old wiring by making replacements. No good deed goes unpunished apparently! The previous owner had bypassed the ignition key switch. So during my "clean up" I must have removed is bypass. now there are no wires coming from the ignition switch. Does anyone having pictures or details of their own carts to use as reference? The issue with the diagrams that are posted is that they are not specific enough to where the connections should be route to. Can I also by pass the ignition switch? What should I do to bypass? I get no power and no clicking at the solenoid when the pedal is depressed. Thanks, Kevin
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
4 pin 3 position ignition switch wiring diagram | Gas EZGO | |||
ignition switch wire diagram | Gas Club Car | |||
2006 ezgo ignition switch diagram | Gas EZGO | |||
EZGO gas ignition switch diagram | Gas EZGO | |||
Looking for wiring diagram to ignition switch | Electric EZGO |