|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
09-28-2013, 01:22 AM
|
#21 |
|
Not Yet Wild
Join Date: Sep 2013
Posts: 7
|
Re: Made a Mini Spool for a G2 Rear End
How did he get the machined side gears to stay put in the mini spool? Don't see any welds or pins. Is it just a tight fit that is pressed together. Exploring my options and trying to get motivated to use my lathe instead of just welding them together on my 87' g2a. thoughts?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-28-2013, 08:13 PM
|
#22 |
|
Getting Wild
Join Date: Mar 2009
Location: Middletown, Missouri
Posts: 103
|
Re: Made a Mini Spool for a G2 Rear End
He cut the gears off the very end of the splined collars which have the splines for the axles ends. Welded in a short piece, turned it down true and then pinned the whole thing. Still working very well.
|
|
|
|
|
09-28-2013, 08:22 PM
|
#23 |
|
Not Yet Wild
Join Date: Sep 2013
Posts: 7
|
Re: Made a Mini Spool for a G2 Rear End
That is what I thought, he just did too good of a job on the finish to tell if it was pinned. Well, I guess that is enough motivation for me. I am going to first try and design a small lockable diff setup, then if the space doesn't allow I will make a mini spool for full lock up. Now to try and figure out how to get my little 6inch atlas lathe to hold 2 inch stock in the 1 inch jaws. Will update with finished product.
|
|
|
|
|
09-28-2013, 09:13 PM
|
#24 |
|
Getting Wild
Join Date: Mar 2009
Location: Middletown, Missouri
Posts: 103
|
Re: Made a Mini Spool for a G2 Rear End
Good luck to you. The spool has made my cart much better in the woods while hunting.
|
|
|
|
|
09-28-2013, 10:53 PM
|
#25 |
|
Not Yet Wild
Join Date: Sep 2013
Posts: 7
|
Re: Made a Mini Spool for a G2 Rear End
What did you use for steel? And did you do the same as "never grow up" or come up with your own design?
Last edited by Mainediesel; 09-28-2013 at 10:54 PM.. Reason: forgot something |
|
|
|
|
09-29-2013, 09:18 AM
|
#26 |
|
Getting Wild
Join Date: Mar 2009
Location: Middletown, Missouri
Posts: 103
|
Re: Made a Mini Spool for a G2 Rear End
I am not sure what "never grow up" did with his design, I never got a chance to talk and ask him about his design.
|
|
|
|
|
01-25-2014, 09:40 AM
|
#27 | |
|
Gone Wild
Join Date: Nov 2013
Posts: 1,088
|
Re: Made a Mini Spool for a G2 Rear End
Quote:
|
|
|
|
|
|
05-29-2014, 08:56 PM
|
#28 |
|
Not Yet Wild
Join Date: Jan 2014
Location: Rogersville, Mo
Posts: 9
|
Re: Made a Mini Spool for a G2 Rear End
How can I get this?
|
|
|
|
|
05-30-2014, 12:02 AM
|
#29 |
|
Gone Wild
Join Date: Aug 2012
Location: Twin Falls Idaho
Posts: 540
|
Re: Made a Mini Spool for a G2 Rear End
Hey "Never Grow Up" I am in for one for a G14. Tell me what I need to do and how much!
|
|
|
|
|
05-31-2014, 07:00 AM
|
#30 |
|
Searching for The Way
 Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: Made a Mini Spool for a G2 Rear End
Guys I don't think this guy comes here anymore. I've sent him multiple PM's with no response. There were two guys on here that built a spool for these carts, can't seem to get in touch with either one of them.
 |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Mini Air Bags | Golf Carts and Parts | |||
| Home made Rear Seat | Lifted Golf Carts | |||
| posi locking/ spool locker for gas yamaha? | Lifted Golf Carts | |||
| New to me Melex Mini T | Melex | |||
| Mini T is HOTTTT Again. | Electric EZGO | |||
Linear Mode
