|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-09-2013, 06:39 PM | #1 |
Getting Wild
Join Date: Apr 2010
Location: Aiken South Carolina
Posts: 105
|
Run Tow Switch
trying to put a new hi output solenoid on my ezgo and need some help with the wiring. Where does the run/tow switch wires from the harness go to? Do they go to one of the small terminals or one of the large ones. Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-09-2013, 06:53 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Run Tow Switch
Not to the solenoid...It is called logic supply - see diagram below.
|
12-10-2013, 05:37 AM | #3 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Run Tow Switch
Quote:
If you have a DCS rather than a PDS, there is a red wire from the Run/Tow switch that does connect to the Battery side large terminal of the solenoid. |
|
12-11-2013, 08:34 AM | #4 |
Getting Wild
Join Date: Apr 2010
Location: Aiken South Carolina
Posts: 105
|
Re: Run Tow Switch
96 txt thanks guys
|
12-11-2013, 08:46 AM | #5 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Run Tow Switch
That would make it a 96 TXT DCS.
This might be the schematic for it rather than the one I posted above. The difference is in the F/R switch |
12-16-2014, 11:31 AM | #6 |
Not Yet Wild
Join Date: Dec 2014
Posts: 1
|
Re: Run Tow Switch
how do you know the positive and negative.? nothing on switch Is on side positive or negative?
|
12-16-2014, 12:32 PM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Run Tow Switch
The RUN/TOW switch is a simple double pole inline on/off switch. All the wires connected to it are the same polarity. This switch interrupts the power supply. You do need to get both of the supply wires on one side and the feed wires on the other though or you will be turning one on and the other off with each flip of the switch instead of both on and both off . I hope this helps.
|
12-16-2014, 12:34 PM | #8 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Run Tow Switch
Quote:
To tell you what wire goes where, we need know which drive system is in cart. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
forward/reverse switch change to toggle switch | Electric Club Car | |||
Pick the winner: ITS, Read Switch, or Key Switch | Electric EZGO | |||
2009 Precedent run/tow toggle switch replaced with keyed switch | Electric Club Car | |||
Forward Reverse switch limit switch | Electric Club Car | |||
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! | Gas Yamaha |