do it urself paint?

[eflyguy]

I painted our cart with interior latex metallic we had leftover from our remodel. Used a cheap Harbor Freight HVLP gun on my pancake compressor, worked like a charm and the paint has held up well for several years.

[rib33024]

Kal and Jd62 it's not nice to high jack some one's thread,

[Jd62]

Ok !!

[CROWN MAN]

I did mine in the front yard with Duplicolor

[Jd62]

Nice ride !!!!!! Grown man

[eflyguy]

*crown

[tim_man86]

Hey i just got done with my cart, don't go cheap on the paint. cause it is way to much work to have to do it over a year from now. i used DuPont Urethane single stage paint. The Urethane is the key, cause when you use the paint with the thinner and hardener and mix it like is says. you will have rock solid paint job. also need to use the same brand urethane primer with the hardener. i pulled the body off to make it easier. first clean body sand with 320. I used a half gallon of primer, don't be afraid put it on thick. once that drys block sand with 400 and prime again. let dry. then block sand again with 600 and lay the paint to it. I used a gallon of paint. let dry about 3 days cause you don't want the paint to dry to hard yet. last cut with 1500 and buff it to a beautiful shine. here is my cart.

[720Deere]

Nice paint work!

[derkoldoo]

hey man, how did you do the flames? did you use a grey or white on flames? did u then go over them with a thinned purple or a purple candy?

[Rhoughton1]

If your re referring to me. I used a bascoat I personally mixed and I just over reduced it and upped the air pressure on the gun.