|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-25-2014, 02:10 PM | #41 | |
Not Yet Wild
Join Date: Apr 2014
Posts: 19
|
Re: Was programming alltrax 400 dcx and now cart is dead
Quote:
how do i test for error codes |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-25-2014, 10:00 PM | #42 |
Gone Wild
Join Date: Nov 2012
Location: Ontario , Canada
Posts: 609
|
Re: Was programming alltrax 400 dcx and now cart is dead
You had said in previous post the map setting was at 3
should it not be at 4 ? , could be wrong on that might only apply to PDS |
04-26-2014, 07:05 AM | #43 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Was programming alltrax 400 dcx and now cart is dead
Quote:
FWIW: The Field Map is actually matched to the motor. |
|
04-28-2014, 12:44 PM | #44 |
Not Yet Wild
Join Date: Apr 2014
Posts: 19
|
Re: Was programming alltrax 400 dcx and now cart is dead
After talking with a dealer of the Alltrax, they told me that with my motor model number that my field map should have been 55. Im not familiar with these field maps and Im very curious as to why number 3 would have been programmed when they tell me 55 is needed and what type of damage could using number 3 cause?
Now Im lost. |
04-28-2014, 02:04 PM | #45 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Was programming alltrax 400 dcx and now cart is dead
Quote:
No damage probably, just wouldn't run at its optimal performance. The controller modifies the torque curve of a Sepex motor on the fly by altering the Armature/Field current ratio and the process is called Field Mapping. The Field map should match the motor. |
|
04-28-2014, 06:03 PM | #46 |
Gone Wild
Join Date: Sep 2012
Location: Savannah, GA
Posts: 2,760
|
Re: Was programming alltrax 400 dcx and now cart is dead
Instructions on how to change field map in an Alltrax controller. Contact Alltrax for the field map hex file you need.
http://www.alltraxinc.com/files/Doc1...E-Software.pdf |
05-03-2014, 03:19 AM | #47 |
Not Yet Wild
Join Date: Apr 2014
Posts: 19
|
Re: Was programming alltrax 400 dcx and now cart is dead
Just an Update for you guys. It was the controller that was bad. A buddy had an extra controller laying around. Popped that controller in and the ITS worked flawless. Have another alltrax ordered and will get in installed soon I hope.
Thanks again for all the help and advice. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Programming Alltrax controller | Electric EZGO | |||
Alltrax Programming | Electric EZGO | |||
Bad OBC after programming Alltrax controller? possible? | Electric Club Car | |||
alltrax programming | Electric EZGO | |||
Alltrax axe programming | Electric EZGO |