|
11-14-2008, 01:23 PM | #1 |
Gone Wild
Join Date: Sep 2008
Posts: 192
|
48v converter
I am having some trouble wiring my 48v to 12v converter. In the instructions it tells me to wire it directly to the batteries, but i don't want that becuase that means it will always be on. So i wired it through the ignition switch all works fine when it is in neutral and reverse but when i put it in forward the lights go out. Any sugestions??
|
11-15-2008, 09:33 AM | #2 |
just leave me alone
Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
|
Re: 48v converter
Hey AD,
Have you checked the DC voltage at the switch Without the convertor in place, then With the convertoer in Place Does the cart still run when the lights go out ? What year and Model is the Cart ? If all else fails connect it across the Batteries as recommended and see if you get the same results, could be defective from the Manufacturer. |
|
|
Similar Threads | ||||
Thread | Forum | |||
voltage converter | Electric Club Car | |||
16 to 12 volt converter problems | Electric Club Car | |||
converter exploded | Electric Club Car | |||
Converter Question | Electric Club Car | |||
Converter installation | Electric Club Car |