02-18-2022, 05:39 PM | #1 |
Not Yet Wild
Join Date: Jan 2022
Posts: 4
|
Epic by Icon speed adjust
Hi Everyone, I’m super happy with my 2022 Epic golf cart, it’s gets up to 25mph easily and feels like it’s got more pull speed to go, I know it’s based on an Icon so how could I get the software changed to get some more speed, really only up to 30!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-18-2022, 11:34 PM | #2 | |
Getting Wild
Join Date: Jul 2021
Posts: 83
|
Re: Epic by Icon speed adjust
Quote:
Early epics with the same 4 pin molex programming port as icons have a Curtis controller and can be programmed With the same Handheld as evolutions and club cars. The more recent epics have a really Funky 2 wire Connector which is unknown to me. I do not have access to one at the moment to get into it, but it still Might be a Curtis. I do know the two wires go to CAN-H and CAN-L. |
|
02-19-2022, 01:26 PM | #3 |
Not Yet Wild
Join Date: Mar 2021
Posts: 29
|
Re: Epic by Icon speed adjust
@exmusic totally agree. 30mph is where the Epic needs to be. Sent mine in to the dealer for a non-working turn signal and asked them to pump the speed to 30mph. Not sure they will, but will report back if they do. I normally travel along a 35mph road and that extra 5mph will help not delay traffic that just does not want to go around me even though I am off on the shoulder/bike lane.
|
03-06-2022, 01:36 PM | #4 | |
Not Yet Wild
Join Date: Jan 2022
Posts: 4
|
Re: Epic by Icon speed adjust
Quote:
|
|
03-06-2022, 04:29 PM | #5 | |
Getting Wild
Join Date: Jul 2021
Posts: 83
|
Re: Epic by Icon speed adjust
Quote:
Wires go to pins 23 and 35 on the controller connector. These are CAN-H and CAN-L. Don’t have a cart to crack this nut yet.. I haven’t been able to identify who Makes this connector. |
|
03-06-2022, 05:40 PM | #6 |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
Re: Epic by Icon speed adjust
It looks like a deutsch connector used a ton in automotive industry.
|
06-02-2022, 01:00 AM | #7 |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
Re: Epic by Icon speed adjust
I am rounding the bend on this one!
|
06-02-2022, 07:46 AM | #8 |
Not Yet Wild
Join Date: Jul 2016
Posts: 43
|
Re: Epic by Icon speed adjust
i have the cables and software on this
|
06-02-2022, 08:39 AM | #9 |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
Re: Epic by Icon speed adjust
Same just trying wrap up the detail on the cable for the marshell controller. Seems like a lot of guys on here are having trouble locating the programming port connector. Is it buried way down in there or zip tied in with that main harness?
|
06-02-2022, 08:54 AM | #10 |
Not Yet Wild
Join Date: Jan 2022
Posts: 4
|
Re: Epic by Icon speed adjust
|
Tags |
epic, icon, speed |
|
|
Similar Threads | ||||
Thread | Forum | |||
2022 Epic by Icon 40L | Icon | |||
Club car speed adjust. | Electric Club Car | |||
96 Club Car adjust speed | Electric Club Car | |||
How to adjust trottle speed | Gas Club Car |