Speed magnet GE motor

[Cruise Master]

Originally Posted by INWO

I am in the final stages of testing an electronic magnet computer.
Plug in tach option.

More information on request.

Available with custom programming.

Plug and play into standard 3p deutch connectors.
Designed for Gem. Universal fit.

Version 1: Plug-in 1/2 count. Same as a 2 magnet motor.

Version 2: Stock count (and speedometer) to a field programmable
setting. ie 15mph. Then switch to half count.
Adjustable switch point.

Version 3: Comes programmed to user defined ratio by 1/16ths.
ie. 13/16 would equal ~20% increase in speed before cart
goes into regen.

Completely reversible. Just unplug. Possible remote switching option. in-out
Overdrive switch?

Let me know your thoughts.
Beta tester needed for other than Gem car.
Target price $50-$100

I'll start my own thread if there is any interest.
I'm just feeling out the market.

Yes

Would be worthy of a new thread. Makes a lot more sense then old school.

[Raystar57]

New 4 pole magnet installed and a new bearing.
Speed results will come later.

[yawood]

Originally Posted by TahoeDawgZ71

It's a card that my supplier sent me with my purchase of 500 speed magnets.

You could do the same as I used to do with science classes. Get a piece of cardboard or thick paper, put it on top of the magnet, sprinkle on some iron filings and tap the card lightly. The filings will collect over the magnets and you will see 4 or 8 collections.

[Sergio]

I used a small magnet and a marker, move the magnet around the perimeter of the motor magnet and put a mark every time the magnet is either attracted or repelled from the motor magnet.

[yawood]

Originally Posted by Sergio

I used a small magnet and a marker, move the magnet around the perimeter of the motor magnet and put a mark every time the magnet is either attracted or repelled from the motor magnet.