lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 08-25-2017, 03:16 PM   #1
TexTurbo
Gone Wild
 
TexTurbo's Avatar
E-Z-GO
 
Join Date: Feb 2017
Location: Liberty Hill, Texas
Posts: 472
Default Clarification..97 Regen 1 OBC byoass

As I have read and re-read the link in the "stickies", I have only managed to confuse myself more and more. (not hard to do!!)
Ex. unplug grey wire at fuse holder and connect to Pack -...."which end of the wire.... Duh, I have 2 ends now !!??

It turns out that the OBC on my latest "project" ( http://www.buggiesgonewild.com/elect...internals.html ) is bad (wont turn on the charger) I cant seem to find instructions that match my configuration.

I have plenty of working stock 48v CC Chargers and even a DPI which is working on charging the pack in a "jumpered" fix right now.

My question.... For a permanent fix, With the regen 1 system that I have, exactly WHICH wires need to be removed, jumpered etc to stay with the dpi and have the OBC out of the system ??

Thanks in advance for the help this board has given !!!
TexTurbo is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 08-29-2017, 12:41 PM   #2
NoleFan4Ever
MOD of all BS!
 
NoleFan4Ever's Avatar
Club Car
 
Join Date: Sep 2011
Location: Florida
Posts: 17,477
Default Re: Clarification..97 Regen 1 OBC byoass

Quote:
Originally Posted by TexTurbo View Post
As I have read and re-read the link in the "stickies", I have only managed to confuse myself more and more. (not hard to do!!)
Ex. unplug grey wire at fuse holder and connect to Pack -...."which end of the wire.... Duh, I have 2 ends now !!??

It turns out that the OBC on my latest "project" ( http://www.buggiesgonewild.com/elect...internals.html ) is bad (wont turn on the charger) I cant seem to find instructions that match my configuration.

I have plenty of working stock 48v CC Chargers and even a DPI which is working on charging the pack in a "jumpered" fix right now.

My question.... For a permanent fix, With the regen 1 system that I have, exactly WHICH wires need to be removed, jumpered etc to stay with the dpi and have the OBC out of the system ??

Thanks in advance for the help this board has given !!!
What is your number.
NoleFan4Ever is offline   Reply With Quote
Old 08-29-2017, 01:11 PM   #3
Sergio
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
Default Re: Clarification..97 Regen 1 OBC byoass

Leave the gray wire (yellow fuse holder) disconnected.

Run the negative wire from the charger receptacle directly to pack negative.

That will allow the cart to charge with a smart (DPI) charger.

This is the Controller lockout by-pass procedure for the Regen I cart:
http://www.buggiesgonewild.com/elect...ml#post1252168
Sergio is offline   Reply With Quote
Old 10-15-2017, 07:23 AM   #4
Tom47
Gone Wild
 
Tom47's Avatar
Club Car
 
Join Date: Dec 2016
Location: Kingsland, Georgia
Posts: 1,825
Default Re: Clarification..97 Regen 1 OBC byoass

Sergio,

Is the procedure the same for the Regen 2 carts? S/N A9927-

Thanks,
Tom
Tom47 is offline   Reply With Quote
Old 10-15-2017, 08:59 AM   #5
Sergio
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
Default Re: Clarification..97 Regen 1 OBC byoass

Quote:
Originally Posted by Tom47 View Post
Sergio,

Is the procedure the same for the Regen 2 carts? S/N A9927-

Thanks,
Tom
This is the procedure for the Regen-2
http://www.buggiesgonewild.com/elect...ml#post1252219
Sergio is offline   Reply With Quote
Old 10-15-2017, 11:16 AM   #6
Tom47
Gone Wild
 
Tom47's Avatar
Club Car
 
Join Date: Dec 2016
Location: Kingsland, Georgia
Posts: 1,825
Default Re: Clarification..97 Regen 1 OBC byoass

Thanks, Sergio! I just knew YOU had it here somewhere!
Tom47 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
48v-12v reducer hookup clarification Electric EZGO
Need clarification on 6x8volt conversion Electric Club Car
Clarification please Gas Club Car
magnets clarification please? Electric Club Car
engine clarification Gas EZGO


All times are GMT -5. The time now is 09:56 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.